DS99R421

www.ti.com

SNLS264D – JUNE 2007 – REVISED APRIL 2013

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings

(1) (2)

−0.3V to +4V

LVCMOS Input Voltage

LVCMOS Output Voltage

LVDS Receiver Input Voltage

−0.3V to +3.9V

LVDS Driver Output Voltage

−0.3V to +3.9V

LVDS Output Short Circuit Duration

10 ms

Junction Temperature

+150°C

Storage Temperature

−65°C to +150°C

Lead Temperature (Soldering, 4 seconds)

+260°C

Package De-rating: DS99R421

− 36L WQFN

1/

Maximum Package Power Dissipation

Capacity

HBM

≥±8 kV

ESD Rating

ISO10605

DS99R421 meets ISO10605

Contact Discharge, DOUT±

±10 kV

Air Discharge, DOUT±

±25 kV

(1)

“Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of

device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or

other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating

Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions.

(2)

If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.

(3)

JEDEC

Recommended Operating Conditions

Min

Nom

Max

Units

3.0

3.3

3.6

V

−40

+25

+105

°C

Input Clock Rate, RxCLKIN±

5

43

MHz

±100

Receiver Input Range

0

V

Electrical Characteristics

(1) (2) (3)

Over recommended operating supply and temperature ranges unless otherwise specified.

Symbol

Parameter

Conditions

Pin/Freq.

Min

Typ

Max

Units

LVCMOS & SCHMITT-TRIGGER INPUT DC SPECIFICATIONS

High Level Input Voltage

PWDNB, DEN, VODSEL,

2.0

V

BISTEN

Low Level Input Voltage

GND

0.8

V

Input Clamp Voltage

−0.9

−1.5

V

Input Current

−10

+10

µA

High Level Input Voltage

OS[2:0]

2.0

V

(Schmitt-triggered Inputs)

High Level Input Voltage

0.8

V

Hysteresis Voltage

200

400

600

mV

(1)

The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as

otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and

are not ensured.

(2)

Typical values represent most likely parametric norms at 3.3V, Ta = +25 degC, and at the Recommended Operation Conditions at the

time of product characterization and are not ensured.

(3)

Current into device pins is defined as positive. Current out of a device pin is defined as negative. Voltages are referenced to ground

Copyright © 2007–2013, Texas Instruments Incorporated

Submit Documentation Feedback

3

Product Folder Links: DS99R421