Switch Function

SPST- 2 through 10 and 12 positions

Switch Contact Resistance

25 milliohms maximum initial

50 milliohms maximum at the end of life

Insulation Resistance

1,000 megohms minimum between

insulated terminals

Dielectric Strength

500 VDC for 1 minute between

adjacent switches

Nonswitching Rating

100 mA or 50 VDC maximum

Switch Capacitance

5 pF maximum between adjacent closed switches

Operating Temperature

- 55°C to +85°C

Actuation Life

2,000 cycles switching 100 mA @ 20 VDC or

0.1 mA @ 5 VDC (dry circuit)

Coplanarity

0.10mm (.004") maximum

Vibration

Per MIL-STD-202F, method 204D, condition B

(.06" or 15 G’s between 10 HZ to 2K HZ) with no

contact inconsistencies greater than 1

microsecond.

Shock

Per MIL-STD-202F, method 213B, condition A

(50 G’s) with no contact inconsistencies greater

than 1 microsecond.

Sealing

Standard bottom seal

Optional top tape seal

Marking

Special marking available consult CTS.

Surface Mount

DIP Switch —

Auto Placeable

Features

Optimized Mechanical Features

• Removable tape seal to withstand IR vapor phase

or wave soldering temperatures, and board washing

• Positive detent separate from contactor

• Gull-wing and "J" lead terminal configurations

Optimized Contact System

• Redundant, wiping contact

• Contactor does not deflect during actuation

Premium Materials

• Gold plated beryllium copper contacts

Electrical and Mechanical Specifications

• Tube or tape and reel packaging available

• Available low profile, medium, and extended height

actuators

• RoHS compliant

Allowable Solder Time

Up to 60 seconds at 260°C

Packaging

1 - 2

© 2008 CTS Corporation. All rights reserved. Information subject to change.

12/30/08

CTS Electrocomponents

www.ctscorp.com

Standard : Anti-static tube packaging

Optional : Tape and reel packaging

®

Electrocomponents

Data Sheet

SMD DIP Switch

• High temperature materials (UL94V-0)