M28W320ECT datasheet(46/53 Pages) STMICROELECTRONICS

46 / 53 page

M28W320ECT, M28W320ECB

46/53

Figure 21. Erase Flowchart and Pseudo Code

Note: If an error is found, the Status Register must be cleared before further Program/Erase operations.

Write 20h

AI03541b

Start

Write Block

Address & D0h

Read Status

YES

b7 = 1

YES

b3 = 0

YES

b4, b5 = 1

VPP Invalid

Error (1)

Command

Sequence Error (1)

b5 = 0

Erase Error (1)

End

YES

b1 = 0

Erase to Protected

Block Error (1)

YES

erase_command ( blockToErase ) {

writeToFlash (any_address, 0x20) ;

writeToFlash (blockToErase, 0xD0) ;

/* only A12-A20 are significannt */

/* Memory enters read status state after

the Erase Command */

} while (status_register.b7== 0) ;

do {

status_register=readFlash (any_address) ;

/* E or G must be toggled*/

if (status_register.b3==1) /*VPP invalid error */

error_handler ( ) ;

if ( (status_register.b4==1) && (status_register.b5==1) )

/* command sequence error */

error_handler ( ) ;

if (status_register.b1==1) /*program to protect block error */

error_handler ( ) ;

if ( (status_register.b5==1) )

/* erase error */

error_handler ( ) ;

}

M28W320ECT Datasheet(PDF) 46 Page - STMicroelectronics

M28W320ECT Datasheet(HTML) 46 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

Datasheet Download

Link URL