75 Watt Medical Grade Automobile Power Adapter

WWW.ASTRODYNE.COM

FAX: 1-908-353-1021

PHONE: 1-908-353-5700

INDUSTRIES

JEROME

INPUT SPECIFICATIONS

Input Voltage Range

10.8-17.6VDC Continuous

Extended Input Voltage Range for 60 Seconds

10-26VDC DCL100 & DCL200

10-20VDC DCL300

OUTPUT SPECIFICATIONS

Voltage and Current

See Model Charts Page 1

Output Voltage Variance

±5%, includes input & output

condition variation and

component variation

Ripple & Noise (PARD, Note 1)

1% of Vout to 100mV p-p, max.

Current Limit

110% to 160% of Full Load

Non Latching, Auto Recovery

Over Voltage Protection

110% to 135% of Vout

Non Latching, Auto Recovery

Protection

SAFETY & EMC

(DESIGNED TO MEET)

Safety

IEC 60601-1, ANSI/AAMI

ES60601 -1 3rd Ed and

IEC 60601-1-11

Safety Isolation

CF Level Isolation at DC Output

connector terminations

EMC General

IEC 60601-1-2 as applied to

Automotive Environment

Emissions

CISPR11, Radiated Emissions,

Class B

ESD

IEC61000-4-2, ±6kV Direct

Discharge, ±8kV Air Discharge

Radiated Immunity

IEC 61000-4-3, Immunity to radi-

ated RF Electromagnetic field

Conducted Immunity

IEC61000-4-6 Immunity to con-

ducted disturbances induced by

radio frequency fields

EU Automotive Directive 2004/104/EC:

Transient Immunity

Sections 6.8 & 6.9, transient

immunity: ISO 7637-2 test

pulses 1, 2a, 2b, 3a, 3b,

4 & 5 recovery class D

Radiated Emissions

Sections 6.5 & 6.6

Auto Plug Characteristics

UL 20589, pertinent sections

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature

-20°C to 40°C

Derating 20% 40°C to 50°C

70°C for 5 minutes

Storage Temperature

Designed to -25 to +75°C

Operating Altitude

Designed to 0-4,000M

Storage Altitude

Designed to 0-10,000M

Humidity

10% to 95% RH,

Non-Condensing

GENERAL SPECIFICATIONS

Isolation

4500VDC

Efficiency (Note 3)

70-90% Output Dependent

Water Ingress

Per IEC60529, IPX2

MECHANICAL SPECIFICATIONS

Housing Dimensions

4.75” x 3.00” x 1.90”

Excludes Rubber Feet

Input Configuration

Standard Auto Plug

1M Length, 18AWG

Output Configuration

Various; Custom 3’ to 15’

length cords, various output

connectors available

NOTES

1. Measured with a 0.1μF ceramic and a 10μF electrolytic capacitors

across the output terminals. The oscilloscope bandwidth is set at 20MHz

a co-axial cable will be used to measure it. The test condition is maximum

load.