Datasheet

www.rohm.com

TSZ02201-0RAR0G200090-1-2

© 2012 ROHM Co., Ltd. All rights reserved.

7/31

11.Nov.2014 Rev.002

TSZ22111･15･00

BA2107G BA2115xxx

(10) Power Supply Rejection Ratio (PSRR)

Indicates the ratio of fluctuation of input offset voltage when supply voltage is changed.

It is normally the fluctuation of DC.

PSRR= (Change of power supply voltage)/(Input offset fluctuation)

(11) Slew Rate (SR)

Indicates the ratio of the change in output voltage with time when a step input signal is applied.

(12) Gain Bandwidth (GBW)

The product of the open-loop voltage gain and the frequency at which the voltage gain decreases 6dB/octave.

Indicates a frequency where the voltage gain of operational amplifier is 1.

Indicates a noise voltage generated inside the operational amplifier equivalent by ideal voltage source connected in

series with input terminal.

(15) Total harmonic distortion + Noise (THD+N)

Indicates the fluctuation of input offset voltage or that of output voltage with reference to the change of output voltage

of driven channel.

(16) Channel Separation (CS)

Indicates the fluctuation in the output voltage of the driven channel with reference to the change of output voltage of

the channel which is not driven.