8

Optical Tranceiving Module with PN Connector (TODX2801)

Optical Tranceiving Module with SMI Connector (TODX2402)

Optical Modules for High-Speed Data Transmission

External appearance of optical

tranceiving module TODX2402

Optical modules for high-speed data transmission support two types of optical connectors, small multi-

media interface (SMI) and premises network (PN).

The SMI optical connector is designed for use in digital home appliances and enables bi-directional

(duplex) optical communication with its size as small as the simplex optical connector used for home

digital audio equipment.

The PN optical connector is the modification of JIS F07 optical connector which has achieved success

in industry application.

External appearance of optical

tranceiving module TODX2801

Note : Since the TODX2801 is currently under development, its specification is subject to change without notice.

New

Products

The TODX2402 optical tranceiving module is an optical transceiver

used with the SMI connector which is designed for use in digital home

appliances.

Since it can communicate at a data rate of 250 Mb/s, it is possible to

transmit Fast Ethernet signals (125 Mb/s) as well as IEEE1394 S100

signals (125 Mb/s) and S200 signals (250 Mb/s).

Main specification of the TODX2402

Data rate: 20 Mb/s to 250 Mb/s (NRZ code)

Transmission distance: 20 m (max) (at 250 Mb/s)

50 m (max) (at 125 Mb/s)

Center wavelength: 650 nm

Operating temperature: 0

°C to 60°C (at 250 Mb/s)

-10

°C to 70°C (at 125 Mb/s)

On-chip transmitting and receiving IC

PECL interface

Supply voltage: 3.3 V

± 0.3 V

Molded resin package

Main specification of the TODX2801

Data rate: 20 Mb/s to 125 Mb/s (NRZ code)

Transmission distance: 20 m (max) (via APF cable)

100 m (max) (via GI-PCH cable)

Center wavelength: 650 nm

Operating temperature: -10

°C to 70°C

PECL interface

Supply voltage: 3.3 V

± 0.3 V

Ceramic package

Under

development

The TODX2801 optical tranceiving module is housed in a ceramic

package which can be used with plastic optical fiber (APF) and plastic

clad silica optical fiber (PCF).

It can be used to transmit Fast Ethernet signals (125 Mb/s) as well as

IEEE1394 S100 signal ( 125 Mb/s ) over longer distance with the PN

optical connector or the JIS F07 optical connector.