MSD Pro Power Coil

PN 8201

Pro Power Coil Mounting Template.

This Coil is designed for use

with an MSD 7AL-2, PN 7220,

7AL-2 Plus, PN 7222, the 7AL-

3, PN 7230 and MSD 8 Igni-

tions only.

Note: Do not connect to an

MSD 6 Series or Digital

Series Ignition Con-

trol.

Use the template to the right

for help in mounting the coil

with the supplied vibration

mounts.

PRIMARY WIRE

ROUTING

The primary terminals of the

Pro Power Coil are located

on the front of the coil. These

wires must be routed away

from the secondary terminal

(coil tower) to prevent the

chance of a misfire. Figure 1

shows the correct routing of

the wires.

Figure 1 Primary Coil Wire Routing

to the actual part dimensions before drilling holes!

Parts Included:

1 - Pro Power Coil

3 - Vibration Mounts

CORRECT

INCORRECT

ONLINE PRODUCT REGISTRATION: Register your MSD product online. Registering your product

will help if there is ever a warranty issue with your product and helps the MSD R&D team create

new products that you ask for! Go to www.msdperformance.com/registration.