IQS213A datasheet(7/48 Pages) ETC2

7 / 48 page

IQ Switch

ProxSense

® Series

IQS213A Datasheet

Page 7 of 48

Revision 2.8

November 2016

5 User Configurable Options

The IQS213A provides One Time Programmable (OTP) user options, which can be programmed

change the device‟s default start-up configuration. Blank/Un-programmed devices has a default

OTP configuration = 00000000 (See Section 5.2 for OTP options).

However,

with the use of Azoteq‟s IQS213A GUI software, the IQS213A can enter streaming mode

in a start-up state (Test Mode) where the OTP options can be configured and evaluated, before

selecting OTP‟s for programming.

The configuration of the device can be done on packaged devices or in-circuit. In-circuit

configuration may be limited by the type and/or values of external components chosen.

Please see Section 5.3 for IQS213A device setup and output configuration examples.

5.1 Configuring of Devices

Azoteq offers a Configuration Tool (CT210 or later) and associated software (USBProg.exe) that

can be used to program the OTP user options for prototyping purposes. More details regarding the

configuration of the device with the USBProg program can be found in "AZD007 - USBProg

Overview" available on the Azoteq website.

For further enquiries regarding this subject, please contact your local distributor or submit enquiries

to Azoteq at: ProxSenseSupport@azoteq.com

IQS213A Datasheet(PDF) 7 Page - List of Unclassifed Manufacturers