For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

8

8 - 6

The circuit board used in the final application

should use RF circuit design techniques. Signal

lines should have 50 Ohm impedance while the

package ground leads and backside ground paddle

should be connected directly to the ground plane

similar to that shown. A sufficient number of via

holes should be used to connect the top and bottom

ground planes. The evaluation circuit board shown

is available from Hittite upon request.

Evaluation PCB

Item

Description

J1 - J4

PCB Mount SMA RF Connector

J5 - J6

2 mm DC Header

C1 - C3

100 pF Capacitor, 0402 Pkg.

C4

1,000 pF Capacitor, 0402 Pkg.

C5 - C7

2.2 µF Tantalum Capacitor

U1

HMC534LP5 / HMC534LP5E VCO

110225 Eval Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

v03.0811

MMIC VCO w/ HALF FREQUENCY OUTPUT

& DIVIDE-BY-4, 10.6 - 11.8 GHz

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D