T6713 datasheet(2/4 Pages) AMPHENOL

2 / 4 page

Telaire T6713 series CO2

ModuleSpecifications

Method

Non Dispersive Infrared (NDIR), gold plated optics,

diffusion sampling (with Telaire’s Patented ABC

Logic Self Calibrated Algorithm)

Measurement Range (2)

0 to 5000 ppm

Dimensions

1.18in X 0.787in X 0.34in

(30mm X 15.6mm X 8.6mm)

Accuracy (1)

400-5000 ppm +/- 30 ppm ± 3% of reading

400-2000 ppm +/- 25 ppm ± 3% of reading

Temperature Dependence

5 ppm per °C or 0.5% of the reading per °C,

whichever is greater

Stability

< 2% of FS over life of sensor (15 years typical)

Pressure Dependence

0.13% of reading per mm Hg

Calibration Interval

Not required

Response Time

< 3 minutes for 90% step change typical

Signal Update

Every 5 seconds

Warm Up Time

•<2minutes(operational)

•10minutes(maximumaccuracy)

Operating Conditions

•14°Fto140°F(-10°Cto60°C)

•0to95%RH,non-condensing

Storage Conditions

-22°F to 158°F (-30°C to 70°C)

Output

Digital (3)

I2C slave up to 100kHz

UART @ 19200 Baud w/Modbus support

PWM Output Mode

Two options:

• Cycle period 1002 ms (~1Hz)

• 40 us (25kHz)

Power Supply Requirements (4)

• 4.5-5.5 VDC

• Peak 200mA (155mA typical)

• Average 25mA (20mA typical)

Interface Connections

Designed for six (6) pin male header with

0.1 in (2.54 mm) spacing. Header not included.

All dimensions in millimeters (mm)

Notes:

(1) Tolerance based on span gas of ±2%, which

adds to the uncertainty, tested at Standard

Ambient Temperature and Pressure (SATP).

(2) Subjecting sensors to environments less

than 400 ppm for more than 15 minutes may

affect accuracy due to ABC Logic algorithm.

(3) Pleasecallfordetailedproductspecifications.

(4) Based on nominal 5VDC input voltage.

For best performance, DC supply should

be a regulated, low noise power source.

T6713 Datasheet(PDF) 2 Page - Amphenol Corporation

T6713 Datasheet(HTML) 2 Page - Amphenol Corporation

Html Pages

1 2 3 4

Datasheet Download

Link URL