ML30.241

MiniLine-2

A NTC limits the input inrush current after turn-on of the input voltage. The inrush current is input voltage and

ambient temperature dependent.

The charging current into EMI suppression capacitors is disregarded in the first microseconds after switch-on.

AC 100V

AC 120V

AC 230V

Inrush current

max.

40°C ambient, cold start

typ.

40°C ambient, cold start

Inrush energy

typ.

40°C ambient, cold start

Fig. 4-1 Input inrush current, typical behavior

Fig. 4-2 Input inrush current, zoom into first peak

Input Voltage

Input Current

Input Current

Input:

230Vac

Output:

24V, 1.3A

Ambient:

25°C

Upper curve:

Input current 5A/DIV

Lower curve:

Input voltage 500V/DIV

Time basis:

10ms / DIV

Input:

230Vac

Output:

24V, 1.3A

Ambient:

25°C

Input current

5A/DIV

Time basis:

400μs / DIV

Mar. 2013 / Rev. 1.2 DS-ML30.241-EN

All parameters are specified at 24V, 1.3A, 230Vac input, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

5/23