June 2016

DocID029197 Rev 1

1/12

1

UM2048

User manual

DSI to HDMI adapter board for STM32 Development Tools

Introduction

The DSI to HDMI adapter board (order code B-LCDAD-HDMI1) provides DSI input port and

HDMI output port. It can be used on STM32 evaluation boards or discovery boards, to

demonstrate video solutions based on STM32 MCUs.

Thanks to the bridge chip ADV7533, the DSI to HDMI adapter board can support

v1.3 output port.

The B-LCDAD-HDMI1 adapter board has the following features:

• Up to four lanes of MIPI/DSI data, each running up to 800 Mbps (video mode only: Non-

Burst mode with synchronization pulse)

• S/PDIF carries stereo LPCM audio or compressed audio

• HDMI output connector:

– Support of video resolutions with pixel clocks up to 80 MHz

– Common-mode filters with ESD protection

Figure 1. DSI to HDMI adapter board

Front side

Back side

Pictures not contractual

www.st.com