Innovative Technology

for a Connected World

DIMENSIONS

All dimensions shown are in inches (millimeters) unless otherwise specified.

Laird Technologies alternating slot/cut design is designed for use in a wide

variety of slotted applications, such as front panel handles, plug-in units,

subrack assemblies, chassis covers and backplanes.

The alternating slot / cut design serves to enhance the gasket strength,

while providing enough flexibility to allow the part to be folded in half with

no resultant finger damage. This is especially significant in during installation

or repair.

Available in a wide variety of plating finishes to meet galvanic compatibility

requirements.

TOP VIEW

RIGHT VIEW

0.191

(4.851)

H

0.050

(1.270)

R. 0.050

(1.270)

52.5°

27.0°

0.026

(0.660)

2X 0.053

(1.346)

0.190

(4.826)

0.0025

(0.063)

0.012

(0.305)

0.085 REF.

(2.159)

0.065

(1.651)

TOP VIEW

16.000 (406.400) Length

14.568 (370.027) Length

0.374 (9.500)

Pitch

0.320

(8.128)

0.218 TYP

(5.537)

0.018 (0.457) Slot

Dimples on 1.500 (38.100) Centers

Randomly Located

Approximate number of fingers is 64.

Pitch 0.250 (6.350)

Slot 0.018 (0.457)

77-077

77-098

Laird Technologies offers a unique product designed to shield the front panels

of IEEE standard 1101.10 card cages, commonly referred to as Dot-10, called

the Compact PCI gasket.

This front panel shielding has been designed to shield between the front

panels on sub racks and plug-in units. This is a beryllium copper solid top

symmetrical slotted fingerstock strip pre-plated in sulfamate nickel. It is

designed to mount on the “T” shape on a front panel extrusion (see below).

Specially designed for wiping applications, this configuration allows total

symmetrical compression action with bi-directional engagement.

Standard size shown is based on the 9.5" (241.300) length per the Dot-10 standard.

Other lengths and plating finishes are available for your specific application.

RIGHT VIEW

2X 0.085

(2.159)

R 0.110

(2.794)

R 0.020

(0.508)

0.110

(2.794)

All dimensions shown are in inches (millimeters) unless otherwise specified.

Laird Technologies alternating slot/cut design is designed for use in a wide

variety of slotted applications, such as front panel handles, plug-in units,

subrack assemblies, chassis covers and backplanes.

The alternating slot / cut design serves to enhance the gasket strength,

while providing enough flexibility to allow the part to be folded in half with

no resultant finger damage. This is especially significant in during installation

or repair.

Available in a wide variety of plating finishes to meet galvanic compatibility

requirements.

TOP VIEW

RIGHT VIEW

0.191

(4.851)

H

0.050

(1.270)

R. 0.050

(1.270)

52.5°

27.0°

0.026

(0.660)

2X 0.053

(1.346)

0.190

(4.826)

0.0025

(0.063)

0.012

(0.305)

0.085 REF.

(2.159)

0.065

(1.651)

TOP VIEW

16.000 (406.400) Length

14.568 (370.027) Length

0.374 (9.500)

Pitch

0.320

(8.128)

0.218 TYP

(5.537)

0.018 (0.457) Slot

Dimples on 1.500 (38.100) Centers

Randomly Located

Approximate number of fingers is 64.

Pitch 0.250 (6.350)

Slot 0.018 (0.457)

77-077

77-098

Laird Technologies offers a unique product designed to shield the front panels

of IEEE standard 1101.10 card cages, commonly referred to as Dot-10, called

the Compact PCI gasket.

This front panel shielding has been designed to shield between the front

panels on sub racks and plug-in units. This is a beryllium copper solid top

symmetrical slotted fingerstock strip pre-plated in sulfamate nickel. It is

designed to mount on the “T” shape on a front panel extrusion (see below).

Specially designed for wiping applications, this configuration allows total

symmetrical compression action with bi-directional engagement.

Standard size shown is based on the 9.5" (241.300) length per the Dot-10 standard.

Other lengths and plating finishes are available for your specific application.

RIGHT VIEW

2X 0.085

(2.159)

R 0.110

(2.794)

R 0.020

(0.508)

0.110

(2.794)

EMI-DS-FINGERSTOCK-ALT SLOT 1112

Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of

Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non-infringement of any Laird Technologies materials or products for

any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and

Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2011 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies

Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein

provides a license under any Laird Technologies or any third party intellectual property rights.

Alternate Slot Series

Fingerstock Gaskets