LMC6064IM datasheet(4/12 Pages) NSC

4 / 12 page

AC Electrical Characteristics

Unless otherwise specified, all limits guaranteed for T

J = 25˚C, Boldface limits apply at the temperature extremes. V

+ = 5V,

− = 0V, V

CM = 1.5V, VO = 2.5V and RL > 1M unless otherwise specified.

Typ

LMC6064AM

LMC6064AI

LMC6064I

Symbol

Parameter

Conditions

(Note 5)

Limit

Units

(Note 6)

Slew Rate

(Note 8)

V/ms

810

Min

GBW

Gain-Bandwidth Product

100

kHz

Phase Margin

Deg

Amp-to-Amp Isolation

(Note 9)

155

Input-Referred Voltage Noise

F = 1 kHz

Input-Referred Current Noise

F = 1 kHz

0.0002

T.H.D.

Total Harmonic Distortion

F = 1 kHz, AV = −5

RL = 100 kΩ,VO = 2VPP

0.01

±5V Supply

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is in-

tended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The

guaranteed specifications apply only for the test conditions listed.

Note 2: Applies to both single-supply and split-supply operation. Continous short circuit operation at elevated ambient temperature can result in exceeding the maxi-

mum allowed junction temperature of 150˚C. Output currents in excess of ±30 mA over long term may adversely affect reliability.

Note 3: The maximum power dissipation is a function of TJ(Max), θJA, and TA. The maximum allowable power dissipation at any ambient temperature is PD = (TJ(Max)

−TA)/θJA.

Note 4: Human body model, 1.5 k

Ω in series with 100 pF.

Note 5: Typical values represent the most likely parametric norm.

Note 6: All limits are guaranteed by testing or statistical analysis.

Note 7: V+ = 15V, VCM = 7.5V and RL connected to 7.5V. For Sourcing tests, 7.5V ≤ VO ≤ 11.5V. For Sinking tests, 2.5V ≤ VO ≤ 7.5V.

Note 8: V+ = 15V. Connected as Voltage Follower with 10V step input. Number specified is the slower of the positive and negative slew rates.

Note 9: Input referred V+ = 15V and RL = 100 kΩ connected to 7.5V. Each amp excited in turn with 100 Hz to produce VO = 12 VPP.

Note 10: For operating at elevated temperatures the device must be derated based on the thermal resistance

θJA with PD = (TJ–TA)/θJA.

Note 11: Do not connect output to V+, when V+ is greater than 13V or reliability witll be adversely affected.

Note 12: All numbers apply for packages soldered directly into a PC board.

Note 13: For guaranteed Military Temperature Range parameters see RETSMC6064X.

LMC6064IM Datasheet(PDF) 4 Page - National Semiconductor (TI)

LMC6064IM Datasheet(HTML) 4 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

Datasheet Download

Link URL