USB-RS232-CC-LLLL-CU-PWR datasheet(6/15 Pages) FTDI

6 / 15 page

Document Reference No.: FT_000077

USB TO RS232 SERIAL CONVERTER RANGE OF CABLES Datasheet Version 1.3

Clearance No.: FTDI# 51

3.2 Features

USB-RS232 converter cable provides a USB to

RS232 serial interface with customised end

connectors.

Entire USB protocol handled by the electronics

in the cable USB.

EIA/TIA-232 and V.28/V.24 communication

interface with low power requirements.

UART interface support for 7 or 8 data bits, 1

or 2 stop bits and odd / even / mark / space /

no parity.

Internal EEPROM with user writeable area.

FTDI’s royalty-free VCP allow for

communication as a standard emulated COM

port and D2XX ‘direct’ drivers provide DLL

application programming interface.

Visual indication of Tx and Rx traffic via LEDs in

the transparent USB connector.

Fully assisted hardware (RTS#/CTS#) or X-On

/ X-Off software handshaking.

Data transfer rates from 300 baud to 1 Mbaud.

Support for FT232R FTDIChip-ID™ feature for

improved security.

Low USB bandwidth consumption.

UHCI / OHCI / EHCI host controller compatible.

USB 2.0 Full Speed compatible.

-40°C to +85°C operating temperature range.

Cable length is 1.80m (6 feet).

ESD Protection for RS-232 I/O's

±15kV Human Body Model (HBM)

±15kV EN61000-4-2 Air Gap Discharge

±8kV EN61000-4-2 Contact Discharge

FCC and CE compliant.

Custom versions available on request (subject

to MOQ).

USB-RS232-CC-LLLL-CU-PWR Datasheet(PDF) 6 Page - Future Technology Devices International Ltd.