R5F100GC datasheet(49/202 Pages) RENESAS

49 / 202 page

RL78/G13

1. OUTLINE

Page 49 of 196

R01DS0131EJ0330 Rev.3.30

Mar 31, 2016

The number of PWM outputs varies depending on the setting of channels in use (the number of

masters and slaves) (see 6.9.3 Operation as multiple PWM output function in the RL78/G13 User’s

Manual).

When setting to PIOR = 1

(2/2)

20-pin

24-pin

25-pin

30-pin

32-pin

36-pin

Item



Clock output/buzzer output

 2.44 kHz, 4.88 kHz, 9.76 kHz, 1.25 MHz, 2.5 MHz, 5 MHz, 10 MHz

(Main system clock: fMAIN = 20 MHz operation)

8/10-bit resolution A/D converter

6 channels

8 channels

Serial interface

[20-pin, 24-pin, 25-pin products]

 CSI: 1 channel/simplified I2C: 1 channel/UART: 1 channel

[30-pin, 32-pin products]

 CSI: 1 channel/simplified I2C: 1 channel/UART: 1 channel

 CSI: 1 channel/simplified I2C: 1 channel/UART (UART supporting LIN-bus): 1 channel

[36-pin products]

 CSI: 1 channel/simplified I2C: 1 channel/UART: 1 channel

 CSI: 2 channels/simplified I2C: 2 channels/UART (UART supporting LIN-bus): 1 channel

2C bus



1 channel

Multiplier and divider/multiply-

accumulator

 16 bits  16 bits = 32 bits (Unsigned or signed)

 32 bits  32 bits = 32 bits (Unsigned)

 16 bits  16 bits + 32 bits = 32 bits (Unsigned or signed)

DMA controller

2 channels

Internal

Vectored interrupt

sources

External

Key interrupt



Reset

 Reset by RESET pin

 Internal reset by watchdog timer

 Internal reset by power-on-reset

 Internal reset by voltage detector

 Internal reset by illegal instruction execution Note

 Internal reset by RAM parity error

 Internal reset by illegal-memory access

Power-on-reset circuit

 Power-on-reset:

1.51 V (TYP.)

 Power-down-reset: 1.50 V (TYP.)

Voltage detector

 Rising edge :

1.67 V to 4.06 V (14 stages)

 Falling edge :

1.63 V to 3.98 V (14 stages)

On-chip debug function

Provided

Power supply voltage

VDD = 1.6 to 5.5 V (T

A = -40 to +85°C)

DD = 2.4 to 5.5 V (TA = -40 to +105°C)

Operating ambient temperature

TA = 40 to +85°C (A: Consumer applications, D: Industrial applications )

TA = 40 to +105°C (G: Industrial applications)

Note

The illegal instruction is generated when instruction code FFH is executed.

Reset by the illegal instruction execution not issued by emulation with the in-circuit emulator or on-chip

debug emulator.

<R>

R5F100GC Datasheet(PDF) 49 Page - Renesas Technology Corp

R5F100GC Datasheet(HTML) 49 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL