Catalog Symbol: HPF, HPF-C, HPF-L, HPF-EE, HPF-JJ,

HPF-FF, HPF-RR, and HPF-WT

Panel-Mount

Agency Information:

UL Recognized, Guide IZLT2, File E14853

CSA Certified, Class 6225-01, File 47235

Flammability Rating: UL 94 HB

HPF

For ⁄‹Ω£™∑ ≈ 1fiΩ¡§∑ to 1⁄Ω™∑ Fuses

Series

Form No. HPF Series

Page 1 of 1

Data Sheet: 2114

0.180" DIA.

(4.6mm)

1.125"

(28.6mm)

1.00"

(25.4mm)

Without Fuse

2.69" Max.

(68.3mm)

0.88"

(22.2mm)

1.78"

(45.2mm)

1.31"

(33.3mm)

2.81" Max.

(71.4mm)

With Fuse

F

SE

All dimensions (

0.015)

.250"

± .003"

(6.35

± .08mm)

(Typ. 2)

1.031" + 0.003"

(26.2mm + 0.08mm)

0.187" + 0.002"

(4.75mm + 0.05mm)

Mounting Hole

Flange Rear of Panel

+

+

0.890"

0.003"

(22.6mm

0.08mm)

1.312" + 0.003"

(33.3mm + 0.08mm)

1.312" + 0.003"

(33.3mm + 0.08mm)

Mounting Hole

Flange Front of Panel

The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is

intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change

design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con-

tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

Dimensional Data

Electrical Ratings

Catalog

Volts

Symbol

Amps

AC

Fuse Description

HPF

30(3)

600

1⁄Ω™∑ (38.1mm).

HPF-C

30(4)

600(4)

1⁄Ω™∑ (38.1mm) clear knob.

HPF-L

5

600

BBS,⁄‹Ω£™∑ ≈ 1‹Ω•∑ fuses.

HPF-EE

15

600

SC 0-15, ⁄‹Ω£™∑ ≈ 1fiΩ¡§∑ fuses.

HPF-JJ

20

600

SC 20, ⁄‹Ω£™∑ ≈ 1⁄‹Ω£™∑ fuses.

HPF-FF(2)

30(3)

480

SC 25 & 30, ⁄‹Ω£™∑ ≈ 1fiΩ•∑ fuses.

HPF-RR

30(3)

600

KTK-R, LP-CC & FNQ-R Class CC fuses.

HPF-WT

30(3)

600

Splash-proof knob.

(2)No CSA Certification

(3)20A max. when used with quick connect terminals.

(4)HPF-C ratings for CSA - 15A, 250V.

General Information:

• Screw-type knob.

• One-piece side terminal and threaded insert eliminates two-

piece solder fabrication.

• Combination ⁄Ω¢∑ quick-connect/solder terminals for

versatility.

• Replacement knob-BK/9789-⁄Ω™ (for HPF, HPF-L, HPF-EE,

HPF-JJ, HPF-FF and HPF-RR).

• The HPF-EE, -RR, -FF, and -JJ are UL

Recognized for branch circuit protection.

• Do not put tension on line (rear) terminal.

CE logo denotes compliance with European Union Low Voltage Directive

(50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact

Bussmann Application Engineering at 636-527-1270 for more information.

6-3-04

SB04184

Maximum panel thickness, mounting flange in front of panel

Assumes Pollution Degree 3 per UL 840:

Conductive pollution, or dry, nonconductive pollution that

becomes conductive due to condensation that is expected.

Maximum panel thickness

not including any sealing gaskets.

System Voltage

600V

480

277

240

120

Fuseholder

mm Inches mm Inches mm Inches mm Inches mm Inches

HPF

0.61 1/32” 1.50 1/32” 5.77 7/32” 6.32 7/32” 7.80 9/32”

Thicker panels may be used if fuse holder load terminal is fully insulated, using a

UL recognized (VW-1) insulative heat-shrink tubing, or if anticipated environment

is of Pollution Degree 1 or 2, or if panel is nonconductive.

Pollution Degree 2- Normally, only nonconductive pollution. However, a temporary

conductivity caused by condensation may be expected.

Pollution Degree 1- No pollution or only dry, nonconductive pollution.

The pollution has no influence.

Maximum panel thickness, mounting flange behind the panel:

5.08mm/0.200” (flush to knob collar)