Typical Performance Characteristics

www.vishay.com

Vishay Sprague

Revision: 21-Jun-17

3

Document Number: 40209

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

MECHANICAL PERFORMANCE CHARACTERISTICS

ITEM

CONDITION

POST TEST PERFORMANCE

Terminal strength /

Shear force test

Apply a pressure load of 5 N for 10 s ± 1 s horizontally to the

center of capacitor side body

Capacitance change

Dissipation factor

Leakage current

Within ± 10 % of initial value

Initial specified limit

Initial specified limit

There shall be no mechanical or visual damage to

capacitors post-conditioning.

Vibration

MIL-STD-202, method 204, condition D,

10 Hz to 2000 Hz, 20 g peak, 8 h, at rated voltage

Electrical measurements are not applicable, since the

same parts are used for shock (specified pulse) test.

There shall be no mechanical or visual damage to

capacitors post-conditioning.

Shock

(specified pulse)

MIL-STD-202, method 213, condition I, 100 g peak

Capacitance change

Dissipation factor

Leakage current

Within ± 10 % of initial value

Initial specified limit

Initial specified limit

There shall be no mechanical or visual damage to

capacitors post-conditioning.

Resistance

to soldering heat

MIL-STD-202, method 210, condition J (leadbearing

capacitors) and K (lead (Pb)-free capacitors), one heat cycle

Capacitance change

Dissipation factor

Leakage current

Within ± 10 % of initial value

Initial specified limit

Initial specified limit

Solderability

MIL-STD-202, method 208, ANSI/J-STD-002,

test B (leadbearing) and B1 (lead (Pb)-free).

Preconditioning per category C (category E - optional).

Does not apply to gold terminations.

Lead (Pb)-free and leadbearing capacitors are backward

and forward compatible

Solder coating of all capacitors shall meet specified

requirements.

There shall be no mechanical or visual damage to

capacitors post-conditioning.

Resistance to

solvents

MIL-STD-202, method 215

There shall be no mechanical or visual damage to

capacitors post-conditioning. Body marking shall

remain legible.

Flammability

Encapsulation materials meet UL 94 V-0 with an oxygen

index of 32 %