■ Overview
The MN838850 converts digital display data from a personal computer or an engineering workstation to analog signal voltages to allow those signals to be displayed on a color TFT LCD panel.

■ Features
• Includes a built-in D/A converter and accepts 8-bit digital input data for 16.7-million color display.
• Output dynamic range: 14.6 V P-P (when AVDD = 15 V)
• Supports both dot inversion drive and source inversion drive schemes.
• Number of drive outputs: 384
• Input data bus: acquires two pixels at the same time
• Supports control of data inversion at each clock cycle.
• Supports γ correction.
• Adopts a drive scheme that does not require precharging.
• Allows serial cascade connection.
• The clock is automatically stopped after the acquisition of a fixed amount of data.
• The shift register shift direction can be set to be either left-to-right or right-to-left.
• Digital circuit block features low-voltage operation: 2.7 to 3.6 V
• Maximum operating clock frequency: 50 MHz (3.1 to 3.6 V), 40 MHz (2.7 to 3.6 V)

■ Applications
• TFT LCD panels