The Cypress MoBL-USB TX2 is a Universal Serial Bus (USB) specification revision 2.0 transceiver, serial and deserializer, to a parallel interface of either 16 bits at 30 MHz or eight bits at 60 MHz.

MoBL-USB™ TX2 Features
■ UTMI-Compliant and USB 2.0 Certified for Device Operation
■ Operates in Both USB 2.0 High Speed (HS), 480 Mbits/second, and Full Speed (FS), 12 Mbits/second
■ Optimized for Seamless Interface with Intel® Monahans Applications Processors
■ Tristate Mode Enables Sharing of UTMI Bus with other Devices
■ Serial-to-Parallel and Parallel-to-Serial Conversions
■ 8-bit Unidirectional, 8-bit Bidirectional, or 16-bit Bidirectional External Data Interface
■ Synchronous Field and EOP Detection on Receive Packets
■ Synchronous Field and EOP Generation on Transmit Packets
■ Data and Clock Recovery from the USB Serial Stream
■ Bit Stuffing and Unstuffing; Bit Stuff Error Detection
■ Staging Register to Manage Data Rate Variation due to Bit Stuffing and Unstuffing
■ 16-bit 30 MHz and 8-bit 60 MHz Parallel Interface
■ Ability to Switch between FS and HS Terminations and Signaling
■ Supports Detection of USB Reset, Suspend, and Resume
■ Supports HS Identification and Detection as defined by the USB 2.0 Specification
■ Supports Transmission of Resume Signaling
■ 3.3V Operation
■ Two Package Options: 56-pin QFN and 56-pin VFBGA
■ All Required Terminations, Including 1.5 Kohm Pull Up on DPLUS, are Internal to Chip
■ Supports USB 2.0 Test Modes

Applications
Mobile Applications
■ Smart Phones
■ PDA Phones
■ Gaming Phones
■ MP3 players
■ Portable Media Players (PMP)
■ GPS Tracking Devices

Consumer Applications
■ Cameras
■ Scanners
■ DSL Modems
■ Memory Card Readers

Non-Consumer Applications
■ Networking
■ Wireless LAN
■ Home PNA