General Description
The AOZ1015 evaluation board is a fully assembled and tested circuit board built with the AOZ1015 buck regulator IC. It outputs a preset or adjustable voltage at 3.3V and up to 1.5A of continuous current. The evaluation board requires an input voltage from 4.5V to 16V. The output voltage is preset and can be adjusted from 0.8V to VIN–0.4V.

Features
● 4.5V to 16V operating input voltage range
● Output voltage is preset to 3.3V and adjustable down to 0.8V
● 1.5A continuous output current
● Fixed 500kHz PWM operation
● Internal soft start
● Cycle-by-cycle current limit
● Short-circuit protection
● Thermal shutdown
● Enables single layer board with all ceramic output capacitors design

Applications
● Point of load DC/DC conversion
● PCIe graphics cards
● Set top boxes
● DVD drives and HDD
● LCD panels
● Cable modems
● Telecom/networking/datacom equipment