Description
This evaluation board demonstrates the key features of STMicroelectronics’ L6727, a new powerful new buck controller. The L6727 makes the design of complete step-down voltage regulators simple and cost effective. It provides a full solution by integrating a 0.8 V reference, control logic and protection, and NMOS drivers in an 8-pin package. The L6727 evaluation board implements a step-down DC/DC converter in a four-layer PCB and demonstrates the operation of the device in a general-purpose application. The input voltage can range from 5 V to 12 V and the output voltage is fixed at 1.25 V. The application can deliver an output current up to 20 A. Airflow must be applied with current higher than 18 A (@VIN = 5 V). The switching frequency is 300 kHz. STEVAL-ISA028V1

Features
■ BOM optimized for 12 V input / 1.25 V output @ 20 A
■ High flexibility to host wide range designs
■ Customizable output voltage
■ L6726A / L6727 compatibility
■ Controller input voltage (VCC) range from 5 V to 12 V
■ Conversion input voltage (VIN) up to 13.2 V
■ DPAK / SO-8 / PowerSO-8 / PowerFLAT MOSFET compatibility
■ Multi-footprint for input and output capacitors
■ Through-hole / SMD inductor compatibility
■ 4-layer PCB