TLV9064IPWR datasheet(21/43 Pages) TI1

21 / 43 page

5 kW

10-mA maximum

V+

OUT

OVERLOAD

Device

TLV9061, TLV9062, TLV9064

www.ti.com

SBOS839B – MARCH 2017 – REVISED OCTOBER 2017

Product Folder Links: TLV9061 TLV9062 TLV9064

Submit Documentation Feedback

11 Power Supply Recommendations

The TLV906x series is specified for operation from 1.8 V to 5.5 V (±0.9 V to ±2.75 V); many specifications apply

from –40°C to +125°C. The Typical Characteristics section presents parameters that can exhibit significant

variance with regard to operating voltage or temperature.

CAUTION

Supply voltages larger than 6 V can permanently damage the device; see the Absolute

Maximum Ratings table.

Place 0.1-µF bypass capacitors close to the power-supply pins to reduce errors coupling in from noisy or high-

impedance power supplies. For more detailed information on bypass capacitor placement, see the section.

11.1 Input and ESD Protection

The TLV906x series incorporates internal ESD protection circuits on all pins. For input and output pins, this

protection primarily consists of current-steering diodes connected between the input and power-supply pins.

These ESD protection diodes provide in-circuit, input overdrive protection, as long as the current is limited to 10-

mA, as stated in the Absolute Maximum Ratings table. Figure 39 shows how a series input resistor can be added

to the driven input to limit the input current. The added resistor contributes thermal noise at the amplifier input

and the value must be kept to a minimum in noise-sensitive applications.

Figure 39. Input Current Protection

TLV9064IPWR Datasheet(PDF) 21 Page - Texas Instruments