HT48C06 datasheet(8/38 Pages) HOLTEK

8 / 38 page

HT48R05A-1/HT48C05/HT48R06A-1/HT48C06

Rev. 1.10

June 9, 2004

The memory pointer register MP (01H) is a 7-bit register.

The bit 7 of MP is undefined and reading will return the

result

²1². Any writing operation to MP will only transfer

the lower 7-bit data to MP.

Accumulator

The accumulator is closely related to ALU operations. It

is also mapped to location 05H of the data memory and

can carry out immediate data operations. The data

movement between two data memory locations must

pass through the accumulator.

Arithmetic and Logic Unit

- ALU

This circuit performs 8-bit arithmetic and logic opera-

tions. The ALU provides the following functions:

· Arithmetic operations (ADD, ADC, SUB, SBC, DAA)

· Logic operations (AND, OR, XOR, CPL)

· Rotation (RL, RR, RLC, RRC)

· Increment and Decrement (INC, DEC)

· Branch decision (SZ, SNZ, SIZ, SDZ ....)

The ALU not only saves the results of a data operation

but also changes the status register.

Status Register

- STATUS

This 8-bit register (0AH) contains the zero flag (Z), carry

flag (C), auxiliary carry flag (AC), overflow flag (OV),

power down flag (PDF), and watchdog time-out flag

(TO). It also records the status information and controls

the operation sequence.

With the exception of the TO and PDF flags, bits in the

status register can be altered by instructions like most

other registers. Any data written into the status register

will not change the TO or PDF flag. In addition opera-

tions related to the status register may give different re-

sults from those intended. The TO flag can be affected

only by system power-up, a WDT time-out or executing

the

²CLR WDT² or ²HALT² instruction. The PDF flag

can be affected only by executing the

²HALT² or ²CLR

WDT

² instruction or a system power-up.

The Z, OV, AC and C flags generally reflect the status of

the latest operations.

In addition, on entering the interrupt sequence or exe-

cuting the subroutine call, the status register will not be

pushed onto the stack automatically. If the contents of

the status are important and if the subroutine can cor-

rupt the status register, precautions must be taken to

save it properly.

Interrupt

The device provides an external interrupt and internal

timer/event counter interrupts. The Interrupt Control

to set the enable or disable and the interrupt request

flags.

Once an interrupt subroutine is serviced, all the other in-

terrupts will be blocked (by clearing the EMI bit). This

scheme may prevent any further interrupt nesting. Other

interrupt requests may happen during this interval but

only the interrupt request flag is recorded. If a certain in-

terrupt requires servicing within the service routine, the

EMI bit and the corresponding bit of INTC may be set to

allow interrupt nesting. If the stack is full, the interrupt re-

quest will not be acknowledged, even if the related inter-

rupt is enabled, until the SP is decremented. If

immediate service is desired, the stack must be pre-

vented from becoming full.

All these kinds of interrupts have a wake-up capability.

As an interrupt is serviced, a control transfer occurs by

pushing the program counter onto the stack, followed by

a branch to a subroutine at specified location in the pro-

gram memory. Only the program counter is pushed onto

the stack. If the contents of the register or status register

G e n e r a l P u r p o s e

D A T A M E M O R Y

( 6 4 B y t e s )

S p e c i a l P u r p o s e

D A T A M E M O R Y

0 0 H

0 1 H

0 2 H

0 3 H

0 4 H

0 5 H

0 6 H

0 7 H

0 8 H

0 9 H

0 A H

0 B H

0 C H

0 D H

0 E H

0 F H

1 0 H

1 1 H

1 2 H

1 3 H

1 4 H

1 5 H

1 6 H

1 7 H

1 8 H

1 9 H

1 A H

1 B H

1 C H

1 D H

1 E H

1 F H

7 F H

I n d i r e c t A d d r e s s i n g R e g i s t e r

M P

A C C

P C L

T B L P

T B L H

W D T S

S T A T U S

I N T C

T M R

T M R C

P A

P A C

P B

P B C

P C

P C C

: U n u s e d

R e a d a s " 0 0 "

3 F H

4 0 H

2 0 H

H T 4 8 R 0 6 A - 1 / H T 4 8 C 0 6

RAM Mapping for HT48R06A-1/HT48C06

HT48C06 Datasheet(PDF) 8 Page - Holtek Semiconductor Inc

HT48C06 Datasheet(HTML) 8 Page - Holtek Semiconductor Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Datasheet Download

Link URL