SPDT RF Switch

Page 2 of 5

Notes

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.

B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.

C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled

to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp

Product Features

• High Power, 2.5W at 2 GHz

• Low insertion loss, 0.4 dB typ. at 3 GHz

• High IIP3, 75 dBm typ. from 100-6000 MHz

• Low current consumption, 120

µA typ.

• Immune to latch up

Typical Applications

• Defense

• Communication Infrastructure

• Test and Measurements

General Description

JSW2-63VHDRP+ is a high power reflective symmetric SPDT switch with integral CMOS driver, operates

with single positive supply voltage while consuming, 120

µA typical. It has been designed for wide band

operation. It is packaged in a tiny 2x2 mm, 12-lead package and is rated MSL1 and passes 1KV for ESD

(HBM).

JSW2-63VHDRP+

REV. A

M161454

JSW2-63VHDRP+

RS/CP

180329

50

Ω

5 - 6000 MHz

CASE STYLE: MT2140

Simplified Schematic and Pad Description

RF Switch with internal driver

Single Supply Voltage, +2.3V to +5.5V

Function

Pad

Number

Description

RF COM

5

RF common/ SUM port*

RF1

8

RF OUT #1 / IN port*

RF2

2

RF OUT #2 / IN port*

Control

10

CMOS Control IN

LS

11

Connect to Pad 12 via R1, connect to ground via R2

VDD

12

Supply

DGND

9

Digital Ground

GND

1,3,4,6,7, Paddle

RF Ground

+RoHS Compliant

The +Suffix identifies RoHS Compliance. See our web site

for RoHS Compliance methodologies and qualifications

*Must be held at 0Vdc. If required, add DC blocking capacitors to prevent DC on these ports.

High Power