| Electronic Components Datasheet Search |
|
FUSB307BMPX Datasheet(PDF) 46 Page - ON Semiconductor |
|
|
|||||||||||||||||||||||||||||
FUSB307BMPX Datasheet(HTML) 46 Page - ON Semiconductor |
|
46 / 57 page ![]() www.onsemi.com 46 Table 50. STD_OUT_CAP Address: 29h Reset Value: FUSB307B: 0x41 Type: Read Bit # Name R/W/C Size (Bits) Standard Outputs Capabilities Description 7 Reserved R 1 Reserved: 00b 6 DEBUG_ACC R 1 0b: Debug Accessory Indicator Not Present 1b: Debug Accessory Indicator Present 5 VBUS_MON R 1 0b: VBUS Present Monitor Not Present 4 AUDIO_ACC R 1 0b: Audio Adapter Accessory Indicator Not Present 3 ACTIVE_CABLE R 1 0b: Active Cable Indicator not Present 2 MUX_CTRL R 1 0b: Mux Control Not Present 1 CON_PRESENT R 1 0b: Connection Present indicator not implemented 0 ORIENT R 1 1b: Connector Orientation Present Table 51. MSGHEADR Address: 2Eh Reset Value: 0x02 for FUSB307B Type: Read/Write Bit # Name R/W/C Size (Bits) Message Header Info Description 7:5 Reserved R 3 Reserved: 000b 4 CBL_PLUG R/W 1 Cable Plug 0b: Message originated from Source, Sink, or DRP 1b: Message originated from a Cable Plug 3 DATA_ROLE R/W 1 Data Role 0b: SINK 1b: SOURCE 2:1 USBPD_REV R/W 2 USB−PD Specification Revision 00b: Revision 1.0 01b: Revision 2.0 10b – 11b: Reserved 0 POWER_ROLE R/W 1 Power Role 0b: Sink 1b: Source Table 52. RXDETECT RXDETECT enables the types of messages and/or signaling to be detected. SOP* enabling also turns on auto−GoodCRC response. This register is reset when: A Hard Reset is received or sent; after the GoodCRC transmission due to RxOneMore; on a disconnect detection; SW_RST or POR. Address: 2Fh Reset Value: 0x00 Type: Read/Write Bit # Name R/W/C Size (Bits) Receive Detect Description (Note 35) 7 Reserved R 1 Reserved: 0b 6 EN_CABLE_RST R 1 0b: Do not detect Cable Reset signaling 5 EN_HRD_RST R/W 1 0b: Do not detect Hard Reset signaling (default) 1b: Detect Hard Reset signaling 4 EN_SOP2_DBG R/W 1 0b: Do not detect SOP_DBG” message (default) 1b: Detect SOP_DBG” message 3 EN_SOP1_DBG R/W 1 0b: Do not detect SOP_DBG’ message (default) 1b: Detect SOP_DBG’ message |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |