www.recom-power.com

REV.: 0/2018

P-6

Reference Design

R-REF03-CAN1

BOM

Comp.

Description

Manufacturer Part Number

Manufacturer

Qty.

C8, C9

CAP, CERM, 68 pF, 100 V, +/- 5%, C0G/NP0,

0603

Vishay

2

C2, C5

CAP, CERM, 1 uF, 50 V, +/- 10%, X7R, 0603

TDK

2

C3, C6

CAP, CERM, 0.1 uF, 25 V, +/- 5%, X7R, 0603

AVX

2

C1, C10, C11, C12,

C13

Cap Cer 1206 50V 4.7uF X7R 10%

TDK

5

D1

Diode, TVS, Bi, 7 V, SOT-23

CDSOT23-SM712

Bourns

1

LED1

LED bright green 0603

150060VS75000

Wurth

1

J1, J2

Connector Header Through Hole 6 position

0.100" (2.54mm)

PEC06SAAN

Sullins

2

TP1-TP10

Test Point, Miniature, SMT

5019

Keystone

10

---

snap in spacer 5mm with 3mm hole

709440800

Wurth

4

• R-REF03-CAN1 Reference Design

• Terms and Conditions

Contents

The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The

products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause

loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized

use of RECOM products in such safety-critical applications.

Prototype Device Waiver from Texas Instruments

The following devices are prototypes:

XISO1042DRW

XISO1042DWR-isolated CAN Transceiver With 70-V Bus Fault Protection and Flexible Data Rate

The texas instruments products ordered are experimental/prototype for which quality assurance, reliability performance testing and/or process qualification may not have been completed. In some cases,

and without limitation, they may include, utilize, or be related to new and emerging technologies that are not presently well defined or understood, or for which industry standards are not yet defined. These

experimental products are intended for internal use and evaluation only and are not authorized for any use in production. All specifications are preliminary and TI reserves the right to modify or discontinue

the products at any time. The products are provided strictly “as is” and with all faults. TI hereby expressly disclaims all warranties, explicit or implied, regarding the products, including but not limited to any

epidemic failure warranty or implied warranties of merchant ability or fitness for a particular purpose.

TI experimental and prototype products are being evaluated by customers for use in many types of applications and systems, including in some cases high-voltage and other potentially dangerous applica-

tions; you are solely responsible for evaluating and maintaining safety in your products, facilities, and activities, and these products, materials, and related applications should be handled only by qualified

personnel who fully understand and can mitigate applicable safety risks. You should review all safety information and notices provided by TI with respect to the product(s), and are responsible for fully

complying with any such provided safety precautions or notices, in addition to determining appropriate safeguards and handling for your intended uses and users of these items.

You acknowledge full and exclusive responsibility to assure the safety of your activities and products and compliance of your activities and products with all applicable laws, regulations, and other applicable

requirements. You may not use any TI products in life-critical medical equipment, or any medical product where failure of such product could cause serious bodily injury or death, unless authorized officers

of the parties have executed a special contract specifically governing such use. You shall fully indemnify ti and its representatives against any claims or damages arising out of any use of ti products that

is not expressly authorized by TI.

Note to distributors: experimental/prototype products shall only be supplied by distributor to the end-user customer as specified by Texas Instruments. If the specified end-user customer does not take

possession of the products, distributor agrees to return all such products to texas instruments. Distributor shall fully indemnify ti and its representatives against damages arising out of any unauthorized

supply of the products.

PACKAGING INFORMATION

Parameter

Type

Value

Packaging Dimension (LxWxH)

carton

200.0 x 135.0 x 68.0mm

Packaging Quantity

1pcs