CAM-M8 - Data Sheet

UBX-15031574 - R04

Labeling and ordering information

Page 28 of 31

Production Information

9 Labeling and ordering information

9.1 Product labeling

The labeling of u-blox CAM-M8Q/C GNSS antenna modules include important product information.

The location of the product type number is shown in Figure 7.

Figure 7: Location of product type number on u-blox CAM-M8Q/C module label

9.2 Explanation of codes

Three different product code formats are used. The

Product Name is used in documentation such as

this data sheet and identifies all u-blox products, independent of packaging and quality grade. The

Ordering Code includes options and quality, while the Type Number includes the hardware and

firmware versions. Table 11 below details these three different formats:

Format

Structure

Product Name

PPP-TGV

Ordering Code

PPP-TGV-N

Type Number

PPP-TGV-N-XX

Table 11: Product code formats

The parts of the product code are explained in Table 12.

Code

Meaning

Example

PPP

Product Family

CAM

TG

Technology & Generation

M8 = u-blox M8

V

Variant

Function set (A-Z), T = Timing, R = DR, etc.

N

Option / Quality Grade

Describes standardized functional element or quality grade

0 = Default variant, A = Automotive

XX

Product Detail

Describes product details or options such as hardware and

software revision, cable length, etc.

Table 12: Part identification code

9.3 Ordering codes

Ordering No.

Product

CAM-M8Q-0

u-blox M8 Concurrent GNSS LCC Antenna Module, TCXO, SAW, LNA, ROM, 9.6 x 14.0 mm, 500

pcs/reel

CAM-M8C-0

u-blox M8 Concurrent GNSS LCC Antenna Module, Crystal, SAW, LNA, ROM, 9.6 x 14.0 mm, 500

pcs/reel

Table 13: Product ordering codes for professional grade module

Change Notifications (PCNs), see our website.