Executing and debugging firmware using a software toolchains

UM1928

10/22

DocID028162 Rev 1

5

Executing and debugging firmware using a software

toolchains

5.1

EWARM toolchain

This is the procedure for compiling/linking and executing an existing EWARM project.

The below steps can be applied to an already existing example, demonstration or template

project available on the STM32L476G Discovery package firmware web page at

First of all, the user needs to go through firmware/readme.txt file which contains a

description of the firmware and hardware/software requirements:

1.

Open the IAR Embedded Workbench for ARM (EWARM). Figure 3 shows the basic

names of the windows referred to in this document.

Figure 3. IAR Embedded Workbench IDE

2.

In the File menu, select Open and click Workspace to display the Open Workspace

dialog box. Browse to select either an example or demonstration or template

workspace file, and click Open to launch it in the Project window.

3.

In the Project menu, select Rebuild All to compile the project.

4.

If the Project is successfully compiled, the window shown in Figure 4: EWARM project

successfully compiled is displayed.

Figure 4. EWARM project successfully compiled