MIC2215 datasheet(3/22 Pages) MICROCHIP

3 / 22 page

 2019 Microchip Technology Inc.

DS20006274A-page 3

MIC2215

1.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings †

Supply Voltage (VIN) ......................................................................................................................................... 0V to +7V

Enable Voltage (VEN) ........................................................................................................................................ 0V to +7V

Power Dissipation (Note 1) ....................................................................................................................Internally Limited

ESD Rating ............................................................................................................................................................ Note 2

Operating Ratings ††

Supply Voltage (VIN1)..............................................................................................................................+2.25V to +5.5V

Supply Voltage (VIN2, VIN3) ........................................................................................................................+2.25V to VIN1

Enable Voltage (VEN) ........................................................................................................................................0V to VIN1

† Notice: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.

This is a stress rating only and functional operation of the device at those or any other conditions above those indicated

in the operational sections of this specification is not intended. Exposure to maximum rating conditions for extended

periods may affect device reliability.

†† Notice: The device is not guaranteed to function outside its operating ratings.

Note 1: The maximum allowable power dissipation of any TA (ambient temperature) is PD(MAX) = (TJ(MAX) – TA) ÷

θJA. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the

regulator will go into thermal shutdown.

2: Devices are ESD sensitive. Handling precautions recommended.

ELECTRICAL CHARACTERISTICS

Electrical Characteristics: VIN1 = VIN2 = VIN3 = VOUT (highest nominal) +1.0V; COUT = 1.0 μF, IOUT = 100 μA; TJ =

+25°C, bold values indicate –40°C ≤ TJ ≤ +125°C unless noted. Note 1

Parameter

Sym.

Min.

Typ.

Max.

Units

Conditions

Output Voltage Accuracy

—

–1

—

–2

—

Output Voltage Temperature

Coefficient

—

ppm/°C —

Line Regulation

—

0.015

0.3

%/V

VIN = VOUT + 1V to 5.5V

Load Regulation

—

0.3

0.5

IOUT = 100 μA to 250 mA

—

0.7

Valid only for VOUT = 1.8V

Dropout Voltage

VDO

—

IOUT = 100 μA

—

IOUT = 50 mA

—

IOUT = 100 mA

—

100

150

IOUT = 150 mA

—

170

275

IOUT = 250 mA

Ground Current

IGND

—

280

400

μA

IOUT1 = IOUT2 = IOUT3 = 100 μA

—

110

150

IOUT1 = 100 μA; IOUT2/IOUT3 = off

—

420

550

IOUT1 = IOUT2 = IOUT3 = 250 mA

Quiescent Current

—

0.2

μA

VEN1 = VEN2 = VEN3 = 0V

Note 1: Specification for packaged product only.

MIC2215 Datasheet(PDF) 3 Page - Microchip Technology

MIC2215 Datasheet(HTML) 3 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Datasheet Download

Link URL