Contact Adhesive 2000-NF with Spray Activator #1

- 7 -

Storage

Best storage temperature is 60-80°F (16-27°C). Higher temperatures reduce normal

storage life. Lower temperatures cause increased viscosity of a temporary nature.

This water-dispersed adhesive will become unusable with prolonged storage below

40°F (4°C). Rotate stock on a “first in, first out” basis. Protect from freezing.

Shelf Life

When stored at the recommended temperature in the original, unopened container,

these products have a shelf life of 15 months from date of shipment.

3M and Fastbond are trademarks of 3M.

Setaflash is a registered trademark of

Erdco Engineering Corp.

Printed in U.S.A.

©3M 2010

78-6900-3502-3

(9/10)

Recycled Paper

40% pre-consumer

10% post-consumer

Refer to Product Label and Material Safety Data Sheet for health and safety information before using this

product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501.

Precautionary

Information

The technical information, recommendations and other statements contained in this document are

based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such

information is not guaranteed.

Technical Information

Unless an additional warranty is specifically stated on the applicable 3M product packaging or product

literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time

3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR

IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY

OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.

If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s

option, replacement of the 3M product or refund of the purchase price.

Warranty,

Limited Remedy,

and Disclaimer

Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,

whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,

including warranty, contract, negligence or strict liability.

Limitation of Liability

This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2000 standards.

ISO 9001: 2000

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use

and performance of a 3M product in a particular application. Given the variety of factors that can affect

the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and

determining whether it is fit for a particular purpose and suitable for user’s method of application.

Product Use

3

Industrial Adhesives and Tapes Division

3M Center, Building 225-3S-06

St. Paul, MN 55144-1000

800-362-3550 • 877-369-2923 (Fax)

www.3M.com/industrial