STM32G0 datasheet(59/135 Pages) STMICROELECTRONICS

Part #	STM32G0

Description	Arm® Cortex®-M0 32-bit MCU, up to 128 KB Flash, 36 KB RAM, 4x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V

PDF	135 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

59 / 135 page

DS12232 Rev 4

59/135

STM32G071x8/xB

Electrical characteristics

107

5.3.5

Supply current characteristics

The current consumption is a function of several parameters and factors such as the

operating voltage, ambient temperature, I/O pin loading, device software configuration,

operating frequencies, I/O pin switching rate, program location in memory and executed

binary code.

The current consumption is measured as described in Figure 14: Current consumption

measurement scheme.

Typical and maximum current consumption

The MCU is placed under the following conditions:

•

All I/O pins are in analog input mode

•

All peripherals are disabled except when explicitly mentioned

•

The Flash memory access time is adjusted with the minimum wait states number,

depending on the fHCLK frequency (refer to the table “Number of wait states according

to CPU clock (HCLK) frequency” available in the RM0444 reference manual).

•

When the peripherals are enabled fPCLK = fHCLK

•

For Flash memory and shared peripherals fPCLK = fHCLK = fHCLKS

Unless otherwise stated, values given in Table 25 through Table 33 are derived from tests

performed under ambient temperature and supply voltage conditions summarized in

Table 21: General operating conditions.

STM32G0 Datasheet(PDF) 59 Page - STMicroelectronics