STUSB1602_V01 datasheet(8/39 Pages) STMICROELECTRONICS

8 / 39 page

General description

3.1

CC interface

The STUSB1602 controls the connection to the configuration channel (CC) pins, CC1 and CC2, through two main

blocks: the CC line interface block and the CC control logic block.

The CC line interface block is used to:

•

Configure termination mode on the CC pins relative to the power mode supported i.e. pull-up for source

power role

•

Monitor the CC pin voltage values relative to the attachment detection thresholds

•

Configure VCONN on the unconnected CC pin when required

•

Protect the CC pins against overvoltage

The CC control logic block is used to:

•

Execute the Type-C FSM relative to the Type-C power mode supported

•

Determine the electrical state for each CC pin relative to the detected thresholds

•

Evaluate the conditions relative to the CC pin states and the VBUS voltage value to transition from one state

to another in the Type-C FSM

•

Detect and establish a valid source-to-sink connection

•

Determine the attached device mode: source, sink or accessory

•

Determine cable orientation to allow external routing of the USB data

•

Manage VBUS power capability: USB default, Type-C medium or Type-C high current mode

•

Handle hardware faults

The CC control logic block implements the Type-C FSMs corresponding to the following Type-C power modes:

•

Source power role with accessory support

•

Sink power role with accessory support

•

Sink power role without accessory support

•

Dual power role with accessory support

The default Type-C power mode is selected through NVM programming (see Section 6 Start-up configuration)

and can be changed by software during operation through the I²C interface.

3.2

BMC interface

Figure 3. BMC interface

STUSB1602

General description

DS11254 - Rev 5

page 8/39

STUSB1602 Datasheet(PDF) 8 Page - STMicroelectronics

STUSB1602 Datasheet(HTML) 8 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

Datasheet Download

Link URL