OPA2991IDSGR datasheet(27/78 Pages) TI

27 / 78 page

Time (20us/div)

C016

Input

Output

Figure 7-9. No Phase Reversal

7.3.7 Electrical Overstress

Designers often ask questions about the capability of an operational amplifier to withstand electrical overstress

(EOS). These questions tend to focus on the device inputs, but may involve the supply voltage pins or even

the output pin. Each of these different pin functions have electrical stress limits determined by the voltage

breakdown characteristics of the particular semiconductor fabrication process and specific circuits connected to

the pin. Additionally, internal electrostatic discharge (ESD) protection is built into these circuits to protect them

from accidental ESD events both before and during product assembly.

Having a good understanding of this basic ESD circuitry and its relevance to an electrical overstress event is

helpful. Figure 7-10 shows an illustration of the ESD circuits contained in the OPAx991 (indicated by the dashed

line area). The ESD protection circuitry involves several current-steering diodes connected from the input and

output pins and routed back to the internal power-supply lines, where the diodes meet at an absorption device

or the power-supply ESD cell, internal to the operational amplifier. This protection circuitry is intended to remain

inactive during normal circuit operation.

www.ti.com

OPA991, OPA2991, OPA4991

SBOS969F – OCTOBER 2019 – REVISED JANUARY 2022

Submit Document Feedback

Product Folder Links: OPA991 OPA2991 OPA4991

OPA2991IDSGR Datasheet(PDF) 27 Page - Texas Instruments