11

OPTIONS

Designation

Model No.

Description

Reflector

mounting

bracket

MS-RF21-1 Protective mounting bracket for RF-210

It protects the reflector from damage and maintains alignment.

MS-RF22

For

RF-220

MS-RF23

For

RF-230

Reflective tape

RF-11

• Sensing range (Note 4):

0.5 m 1.640 ft [

CX-491□]

0.8 m 2.625 ft [

CX-493□]

• Ambient temperature: -25 to +50 °C

-13 to +122 °F

• Ambient humidity: 35 to 85 % RH

Notes: 1) Keep the tape free from

stress. If it is pressed too

much, its capability may

deteriorate.

2) Do not cut the tape. It will

deteriorate the sensing

performance.

RF-12

• Sensing range (Note 4):

0.7 m 2.297 ft [

CX-491□]

1.2 m 3.937 ft [

CX-493□]

0.1 to 0.6 m

0.328 to 1.969 ft [

CX-482□]

RF-13

• Sensing range (Note 5):

0.5 m 1.640 ft [

CX-491□]

• Ambient temperature: -25 to +55 °C

-13 to +131 °F

• Ambient humidity: 35 to 85 % RH

Sensor

mounting

bracket (Note 1)

MS-CX2-1

Foot angled mounting bracket

It can also be used for mounting

RF-210.

The thru-beam type

sensor needs two

brackets.

MS-CX2-2

Foot biangled mounting bracket

It can also be used for mounting

RF-210.

MS-CX2-4

Protective mounting bracket

MS-CX2-5

Back biangled mounting bracket

MS-CX-3

Back angled mounting bracket

Universal

sensor mounting

stand (Note 2)

MS-AJ1

Horizontal mounting type

Basic assembly

MS-AJ2

Vertical mounting type

MS-AJ1-A

Horizontal mounting type

Lateral arm assembly

MS-AJ2-A

Vertical mounting type

MS-AJ1-M

Horizontal mounting type

Assembly for reflector

MS-AJ2-M

Vertical mounting type

Sensor checker

(Note 3)

CHX-SC2

It is useful for beam alignment of thru-beam type sensors. The optimum

receiver position is given by indicators, as well as an audio signal.

Notes: 1) The plug-in connector type sensor does not allow use of some sensor mounting brackets

because of the protrusion of the connector.

2) Refer to the general catalog for details of the universal sensor mounting stand.

3) Refer to the general catalog for details of the sensor checker

CHX-SC2.

4) Set the distance between the sensor and the reflective tape to 0.1 m 0.328 ft (

CX-482□:

0.4 m 1.312 ft) or more.

5) Set the distance between the sensor and the reflective tape to 0.2 m 0.656 ft or more.

Reflector mounting bracket

•

MS-RF23

Reflective tape

Sensor mounting bracket

•

MS-RF21-1

•

MS-RF22

Two M3 (length 12 mm

0.472 in) screws with

washers are attached.

Two M3 (length 8 mm

0.315 in) screws with

washers are attached.

Two M4 (length 10 mm

0.394 in) screws with

washers are attached.

•

RF-11

•

RF-12

•

RF-13

30 mm

1.181 in

0.7 mm

0.028 in

8 mm

0.315 in

30 mm

1.181 in

25 mm

0.984 in

0.7 mm

0.028 in

30 mm

1.181 in

30 mm

1.181 in

0.5 mm

0.020 in

•

MS-CX2-1

•

MS-CX2-2

•

MS-CX2-4

•

MS-CX2-5

•

MS-CX-3

Sensor checker

Two M3 (length 12 mm

0.472 in) screws with

washers are attached.

Two M3 (length 12 mm

0.472 in) screws with

washers are attached.

Two M3 (length 14 mm

0.551 in) screws with

washers are attached.

Two M3 (length 12 mm

0.472 in) screws with

washers are attached.

Two M3 (length 12 mm 0.472 in)

screws with washers are attached.

•

CHX-SC2

LEVE

L

POWER

CH

X-S

C2

Sensor checker

Universal sensor mounting stand

•

MS-AJ2

•

MS-AJ2-A

With the lateral arm, the

sensor can sense from

above a production line.

Forward / back

adjustment:

130 mm 5.118 in

approx.

•

MS-AJ2-M

Elevation

angle: ±45˚

Mounting hole

for M6 screw

Swivel:

360˚ rotation

45˚

45˚

Height

adjustment:

150 mm

5.906 in

approx.

Angle adjustment: ±45˚

Swivel:

360˚ rotation

Mounting

hole for

M6 screw

360˚

45˚

45˚

rotation

Height

adjustment:

150 mm

5.906 in

approx.

Height

adjustment:

150 mm

5.906 in

approx.

Mounting hole

for M6 screw

Swivel:

360˚ rotation

45˚

45˚

Elevation

angle: ±45˚

•

MS-AJ1

•

MS-AJ1-A

•

MS-AJ1-M

Elevation

angle: ±45˚

Swivel:

360˚ rotation

Mounting hole

for M6 screw

45˚

45˚

Height

adjustment:

150 mm

5.906 in

approx.

Angle adjustment: ±45˚

Swivel:

360˚ rotation

Mounting

hole for

M6 screw

360˚

45˚

45˚

rotation

Height

adjustment:

150 mm

5.906 in

approx.

Swivel:

360˚ rotation

Elevation

angle: ±45˚

Height

adjustment:

150 mm

5.906 in

approx.

Mounting hole

for M6 screw

45˚

45˚

With the lateral arm, the

sensor can sense from

above a production line.

Forward / back

adjustment:

130 mm 5.118 in

approx.