R

EM4102

Copyright © 2005, EM Microelectronic-Marin SA

7

www.emmicroelectronic.com

Ordering Information

Die Form

EM4102

-

Version:

Customer Version:

A6 = Manchester, 64 clocks per bit

%%% = only for custom specific version

A5 = Manchester, 32 clocks per bit

B6 = Bi-Phase, 64 clocks per bit

Bumping:

B5 = Bi-Phase, 32 clocks per bit

" " (blank) = no bumps

C4 = PSK, 16 clocks per bit

E = with Gold Bumps

Die form:

Thickness:

WW = Wafer

7 = 7 mils (178um)

WS = Sawn Wafer/Frame

11 = 11 mils (280um)

WT = Sticky Tape

WP = Waffle Pack (note 1)

%%%

A6 WS 11 E

This chart shows general offering; for detailed Part Number to order, please see the table “Standard Versions” below.

Remarks:

•

For ordering please use table of “Standard Version” table below.

•

For specifications of Delivery Form, including gold bumps, tape and bulk, as well as possible other delivery form or

packages, please contact EM Microelectronic-Marin S.A. Sales office.

•

Note 1: This is a non-standard package. Please contact EM Microelectronic-Marin S.A Sales office for availability.

Standard Versions:

The versions below are considered standards and should be readily available. For other versions or other delivery form,

please contact EM Microelectronic-Marin S.A. Please make sure to give complete part number when ordering, without

spacing.

Part Number

Bit coding

Cycle/bit

Card / Die Form

Delivery Form

/ bumping

EM4102A6WP11E

Manchester

64

Die in waffle pack, 11 mils

with gold bumps

EM4102A6WS11E

Manchester

64

Sawn wafer/Frame, 11 mils

with gold bumps

EM4102A6WT11E

Manchester

64

Die on sticky tape, 11 mils

with gold bumps

EM4102A6WW11E

Manchester

64

Unsawn wafer, 11 mils

with gold bumps

EM4102XXYYY-%%%

custom

custom

custom

custom

Product Support

Check our Web Site under Products/RF Identification section.

Questions can be sent to info@emmicroelectronic.com

EM Microelectronic-Marin SA (EM) makes no warranty for the use of its products, other than those expressly contained in the

Company's standard warranty which is detailed in EM's General Terms of Sale located on the Company's web site. EM assumes no

responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at

any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other

intellectual property of EM are granted in connection with the sale of EM products, expressly or by implications. EM's products are not

authorized for use as components in life support devices or systems.

© EM Microelectronic-Marin SA, 02/05, Rev. F