STM32H7B0AB datasheet(102/205 Pages) STMICROELECTRONICS

102 / 205 page

•

The sum of the currents sourced by all the I/Os on VDD, plus the maximum Run consumption of the MCU

sourced on VDD, cannot exceed the absolute maximum rating ΣIVDD (see Table 18. Current characteristics).

•

The sum of the currents sunk by all the I/Os on VSS plus the maximum Run consumption of the MCU sunk

on VSS cannot exceed the absolute maximum rating ΣIVSS (see Table 18. Current characteristics).

Output voltage levels

Unless otherwise specified, the parameters given in Table 64. Output voltage characteristics for all I/Os except

PC13, PC14, PC15 and PI8 and Table 65. Output voltage characteristics for PC13, PC14, PC15 and PI8 are

derived from tests performed under ambient temperature and VDD supply voltage conditions summarized in

Table 20. General operating conditions. All I/Os are CMOS and TTL compliant.

Table 64. Output voltage characteristics for all I/Os except PC13, PC14, PC15 and PI8

The IIO current sourced or sunk by the device must always respect the absolute maximum rating specified in Table 17. Voltage

characteristics, and the sum of the currents sourced or sunk by all the I/Os (I/O ports and control pins) must always respect the

absolute maximum ratings ΣIIO.

Symbol

Parameter

Conditions(1)

Min

Max Unit

VOL

Output low level voltage

CMOS port(2)

IIO=8 mA

2.7 V≤ VDD ≤3.6 V

0.4

VOH

Output high level voltage

CMOS port(2)

IIO= −8 mA

2.7 V≤ VDD ≤3.6 V

VDD−0.4

VOL(3)

Output low level voltage

TTL port(2)

IIO=8 mA

2.7 V≤ VDD ≤3.6 V

0.4

VOH(3)

Output high level voltage

TTL port(2)

IIO=-8 mA

2.7 V≤ VDD ≤3.6 V

2.4

VOL(3)

Output low level voltage

IIO=20 mA

2.7 V≤ VDD ≤3.6 V

1.3

VOH(3)

Output high level voltage

IIO=−20 mA

2.7 V≤ VDD ≤3.6 V

VDD−1.3

VOL(3)

Output low level voltage

IIO= 4 mA

1.62 V≤ VDD ≤3.6 V

0.4

VOH (3)

Output high level voltage

IIO= −4 mA 1.62 V≤VDD<3.6 V VDD−0.4

VOLFM+(3) Output low level voltage for an FTf I/O pin in FM+ mode

IIO= 20 mA

2.3 V≤ VDD≤3.6 V

0.4

IIO= 10 mA

1.62 V≤ VDD ≤3.6 V

0.4

1. The IIO current sourced or sunk by the device must always respect the absolute maximum rating specified in

Table 17. Voltage characteristics, and the sum of the currents sourced or sunk by all the I/Os (I/O ports and control pins)

must always respect the absolute maximum ratings ΣIIO.

2. TTL and CMOS outputs are compatible with JEDEC standards JESD36 and JESD52.

3. Guaranteed by design.

Table 65. Output voltage characteristics for PC13, PC14, PC15 and PI8

Symbol

Parameter

Conditions(1)

Min

Max

Unit

VOL

Output low level voltage

CMOS port(2) IIO=3 mA, 2.7 V≤ VDD ≤ 3.6 V

0.4

VOH

Output high level voltage

CMOS port(2) IIO= −3 mA, 2.7 V≤ VDD ≤ 3.6 V

VDD−0.4

STM32H7B0xB

Operating conditions

DS13196 - Rev 7

page 102/205

STM32H7B0AB Datasheet(PDF) 102 Page - STMicroelectronics

STM32H7B0AB Datasheet(HTML) 102 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL