ISL70100SEH, ISL73100SEH

1. Overview

R34DS0009EU0101 Rev.1.01

Page 3 of 27

Jul.10.20

1.

Overview

1.1

Block Diagram

1.2

Ordering Information

Figure 3. ISL70100SEH Block Diagram

Ordering SMD

Number (Note 1)

Part Number (Note 2)

Radiation Hardness

(Total Ionizing Dose)

Temp Range

(°C)

Package

(RoHS Compliant)

Package

Drawing

5962R2021201VXC

ISL70100SEHVF

HDR to 100krad(Si),

LDR to 75krad(Si)

-55 to +125

10 Ld FP

K10.A

5962R2021201V9A

ISL70100SEHVX (Note 3)

-55 to +125

Die

N/A

5962L2021202VXC

ISL73100SEHVF

LDR to 75krad(Si)

-55 to +125

10 Ld FP

K10.A

5962L2021202V9A

ISL73100SEHVX (Note 3)

-55 to +125

Die

N/A

N/A

ISL70100SEHF/PROTO (Note 4)

N/A

-55 to +125

10 Ld FP

K10.A

N/A

ISL70100SEHX/SAMPLE (Notes 3, 4) N/A

-55 to +125

Die

N/A

N/A

ISL73100SEHF/PROTO (Note 4)

N/A

-55 to +125

10 Ld FP

K10.A

N/A

ISL73100SEHX/SAMPLE (Notes 3, 4) N/A

-55 to +125

Die

N/A

N/A

ISL73100SEHEV1Z (Note 5)

Evaluation Board with ISL73100SEHF/PROTO

Notes:

1. Specifications for Rad Hard QML devices are controlled by the Defense Logistics Agency Land and Maritime (DLA). The SMD numbers

listed must be used when ordering.

2. These Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible with

both SnPb and Pb-free soldering operations.

3. Die product tested at TA = + 25°C. The wafer probe test includes functional and parametric testing sufficient to make the die capable of

meeting the electrical performance outlined in “Electrical Specifications” on page 6.

4. The /PROTO and /SAMPLE are not rated or certified for Total Ionizing Dose (TID) or Single Event Effect (SEE) immunity. These parts are

intended for engineering evaluation purposes only. The /PROTO parts meet the electrical limits and conditions across temperature

specified in the DLA SMD and are in the same form and fit as the qualified device. The /SAMPLE parts are capable of meeting the

electrical limits and conditions specified in the DLA SMD. The /SAMPLE parts do not receive 100% screening across temperature to the

DLA SMD electrical limits. These part types do not come with a Certificate of Conformance because they are not DLA qualified devices.

5. The evaluation board uses the /PROTO parts. The /PROTO parts are not rated or certified for Total Ionizing Dose (TID) or Single Event

Effect (SEE) immunity.

OUT

V+

RS+

RS-

V-

1.7 V

V-

V-

V-

OUT

V+

RS+

RS-

V-

1.7 V

V-

V-

V-