DSPIC30F datasheet(3/220 Pages) MICROCHIP

3 / 220 page

 2004 Microchip Technology Inc.

Preliminary

DS70116C-page 1

dsPIC30F5011/5013

High Performance Modified RISC CPU:

• Modified Harvard architecture

• C compiler optimized instruction set architecture

• Flexible addressing modes

• 84 base instructions

• 24-bit wide instructions, 16-bit wide data path

• 66 Kbytes on-chip Flash program space

• 4 Kbytes of on-chip data RAM

• 1 Kbytes of non-volatile data EEPROM

• 16 x 16-bit working register array

• Up to 30 MIPs operation:

- DC to 40 MHz external clock input

- 4 MHz-10 MHz oscillator input with

PLL active (4x, 8x, 16x)

• Up to 41 interrupt sources:

- 8 user selectable priority levels

- 5 external interrupt sources

- 4 processor traps

DSP Features:

• Dual data fetch

• Modulo and Bit-reversed modes

• Two 40-bit wide accumulators with optional

saturation logic

• 17-bit x 17-bit single cycle hardware fractional/

integer multiplier

• All DSP instructins are single cycle

- Multiply-Accumulate (MAC) operation

• Single cycle ±16 shift

Peripheral Features:

• High current sink/source I/O pins: 25 mA/25 mA

• Five 16-bit timers/counters; optionally pair up 16-

bit timers into 32-bit timer modules

• 16-bit Capture input functions

• 16-bit Compare/PWM output functions:

• Data Converter Interface (DCI) supports common

audio Codec protocols, including I2S and AC’97

• 3-wire SPI™ modules (supports 4 Frame modes)

•I2C™ module supports Multi-Master/Slave mode

and 7-bit/10-bit addressing

• Two addressable UART modules with FIFO

buffers

• Two CAN bus modules compliant with CAN 2.0B

standard

Analog Features:

• 12-bit Analog-to-Digital Converter (A/D) with:

- 100 Ksps conversion rate

- Up to 16 input channels

- Conversion available during Sleep and Idle

• Programmable Low Voltage Detection (PLVD)

• Programmable Brown-out Detection and Reset

generation

Special Microcontroller Features:

• Enhanced Flash program memory:

- 10,000 erase/write cycle (min.) for

industrial temperature range, 100K (typical)

• Data EEPROM memory:

- 100,000 erase/write cycle (min.) for

industrial temperature range, 1M (typical)

• Self-reprogrammable under software control

• Power-on Reset (POR), Power-up Timer (PWRT)

and Oscillator Start-up Timer (OST)

• Flexible Watchdog Timer (WDT) with on-chip low

power RC oscillator for reliable operation

• Fail-Safe Clock Monitor operation:

- Detects clock failure and switches to on-chip

low power RC oscillator

• Programmable code protection

• In-Circuit Serial Programming™ (ICSP™)

• Selectable Power Management modes:

- Sleep, Idle and Alternate Clock modes

CMOS Technology:

• Low power, high speed Flash technology

• Wide operating voltage range (2.5V to 5.5V)

• Industrial and Extended temperature ranges

• Low power consumption

dsPIC30F5011/5013 High Performance

Digital Signal Controllers

DSPIC30F Datasheet(PDF) 3 Page - Microchip Technology

DSPIC30F Datasheet(HTML) 3 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL