GWIXC1100BCT datasheet(116/134 Pages) INTEL

116 / 134 page

Intel® IXP42X Product Line of Network Processors and IXC1100 Control Plane Processor

March 2005

Datasheet

116

Document Number: 252479, Revision: 005

Tdata_setup

Data valid prior to the rising edge of the HDS1 data

strobe.

Cycles

3, 5, 6

Tdata_hold

Data valid after the rising edge of the HDS1 data strobe.

Cycles

3, 6

Trecov

Time required between successive accesses on the

expansion interface.

Cycles

4, 6

Table 59.

HPI-8 Mode Write Access Values

Symbol

Parameter

Min.

Max.

Units

Notes

Notes:

The address phase parameter (T1) must be set to a minimum value of 2. This value allows three T

clocks for the address phase. This setting is required to ensure that in the event of an HRDY, the

Intel® IXP42X Product Line and Intel® IXC1100 Control Plane processors has had sufficient time to

recognize the HRDY and hold the address phase for at least one clock pulse after the HRDY is de-

active.

The data setup phase parameter (T2) must be set to a minimum value of 2. This value allows three T

clocks for setup phase.

The data strobe phase parameter (T3) must be set to a minimum value of 1. This value allows two T

clocks for the data phase. This setting is required to ensure that in the event of an HRDY, the Intel®

IXP42X Product Line and Intel® IXC1100 Control Plane processors has had sufficient time to

recognize the HRDY and hold the data setup phase for at least one clock pulse after the HRDY is de-

active.

Setting the recovery phase parameter (T5) will adjust the duration between successive accesses on

the Expansion Bus interface.

HRDY can be asserted by the DSP at any point in the access. The interface will not leave states T1 or

T3 until HRDY is de-active.

One cycle is the period of the Expansion Bus clock.

Timing tests were performed with a 70-pF capacitor to ground.

GWIXC1100BCT Datasheet(PDF) 116 Page - Intel Corporation

GWIXC1100BCT Datasheet(HTML) 116 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL