1.

General description

The 74HC4016 is a quad single pole, single throw analog switch. Each switch features

two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is

LOW, the analog switch is turned off. Inputs include clamp diodes. This enables the use of

current limiting resistors to interface inputs to voltages in excess of VCC.

2.

Features and benefits

 Input levels nE inputs:

 For 74HC4016: CMOS level

 Typical ‘break before make’ built-in

 Low ON resistance:

 160

 (typical) at V

CC = 4.5 V

 120

 (typical) at V

CC = 6.0 V

 85

 (typical) at V

CC = 9.0 V

 Specified in compliance with JEDEC standard no. 7A

 ESD protection:

 HBM JESD22-A114F exceeds 2000 V

 MM JESD22-A115-A exceeds 200 V

 Specified from

40 Cto +85 C and 40 Cto +125 C

3.

Ordering information

74HC4016

Quad single-pole single-throw analog switch

Rev. 3 — 12 December 2016

Product data sheet

Table 1.

Ordering information

Type number Package

Temperature range

Name

Description

Version

74HC4016D

40 C to +125 C

SO14

plastic small outline package; 14 leads; body width 3.9 mm

SOT108-1

74HC4016PW

40 C to +125 C

TSSOP14 plastic thin shrink small outline package; 14 leads;

body width 4.4 mm

SOT402-1