In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. J013-E1-02

General-purpose Latching Relay

MYK

77

R

Terminal Arrangement/Internal Connections (Bottom View)

Note: 1. Resistor is for ampere-turn compensation and is

incorporated in the Relay rated at 50 VAC or above.

2. Pay attention to the polarity of the set and reset coils,

as incorrect connection of positive and negative ter-

minal will result in the Relay malfunctioning.

AC Model

DC Model

When using the Relay rated at 110 VAC at a supply volt-

age of 220 VAC, be sure to connect external resistors

Rs and Rr to the Relay.

If the supply voltage is applied to the set and reset coils

at the same time, the Relay will be put in the set state.

Use at 220 VAC

Rs: 7.3 k

Ω 3 W

Rr: 14.3 k

Ω 1 W