RF Micro Devices Inc.

7628 Thorndike Road, Greensboro, NC 27409-9421

DS20151001

For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.

The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of

third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended

application circuitry and specifications at any time without prior notice.

9 of 22

RF5216

Parameter

Specification

Unit

Condition

Min

Typ

Max

Switch, High Bands (ULL-TRX)

Nominal test conditions unless otherwise stated; All

unused ports terminated in 50

Ω; Logic State given in

condition; VBATT=3.5V; PIN=-6dBm; TA=+25°C; Duty

Cycle=100%.

Frequency

2300

2690

MHz

Insertion Loss, TRXn - ANT

1.1

dB

TRX3, TRX4, TRX5, TRX8, TRX9 (See note 1)

Input VSWR, TRXn - ANT

1.0

-

1.5

X:1

Isolation, Any ULL-TRX Port

25

dB

from active ULL-TRX to any off TRX

Isolation, TRX4 and TRX5

25

dB

from active TRX4 or TRX5 to any off TRX (adjacent ports)

Isolation, Any Other ULL-TRX Port

20

dB

from active ULL-TRX to any off TRX (adjacent ports)

IMD2, Any ULL-TRX Port

-105

dBm

TX=+20dBm, Blocker=-15dBm

IMD3, Any ULL-TRX Port

-105

dBm

TX=+20dBm, Blocker=-15dBm

IMD3, TRX8

-95

dBm

TX (2550MHz) =+24dBm, Blocker (2430MHz) =+2dBm

Harmonic, 2fo

-55

dBm

Input Power=27dBm

Harmonic, 3fo

-55

dBm

Triple Beat Ratio

81

85

dBc

Note 1: For optimal Insertion Loss on ULL ports, Input Matching Return Loss must be greater than -20 dB.