5 Parameter Measurement Information

A.

CL includes probe and test-fixture capacitance.

B.

Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2

is for an output with internal conditions such that the output is high except when disabled by the output control.

C.

All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr = 3 ns, tf = 3 ns. Phase

relationships between waveforms are arbitrary.

D.

For clock inputs, fmax is measured with the input duty cycle at 50%.

E.

The outputs are measured one at a time with one input transition per measurement.

F.

tPLH and tPHL are the same as tpd.

G.

tPZL and tPZH are the same as ten.

H.

tPLZ and tPHZ are the same as tdis.

I.

All parameters and waveforms are not applicable to all devices.

Figure 5-1. Load Circuit and Voltage Waveforms

CD54ACT138, CD74ACT138

SCHS329C – JANUARY 2003 – REVISED JULY 2024

www.ti.com

6

Submit Document Feedback

Copyright © 2024 Texas Instruments Incorporated

Product Folder Links: CD54ACT138 CD74ACT138