 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
FS4500 Datasheet(PDF) 13 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
FS4500 Datasheet(HTML) 13 Page - NXP Semiconductors |
|
|
13 / 153 page  NXP Semiconductors FS6500-FS4500-ASILD Safety power system basis chip with CAN FD and LIN transceivers All voltages are with respect to ground, unless otherwise specified. Exceeding these ratings may cause a malfunction or permanent damage to the device. Symbol Ratings Value Unit Notes VESD-GUN9 330 Ω/150 pF unpowered according to IEC 61000-4-2:(16) ±12.0 kV VESD-GUN10 330 Ω/150 pF unpowered according to OEM LIN, CAN, FlexRay conformance ±12.0 kV VESD-GUN11 2.0 kΩ/150 pF unpowered according to ISO 10605(15) ±12.0 kV VESD-GUN12 2.0 kΩ/330 pF powered according to ISO 10605(15) ±12.0 kV Thermal ratings TA Ambient temperature –40 to 125 °C TJ Junction temperature –40 to 150 °C TSTG Storage temperature –55 to 150 °C Thermal resistance RθJA Thermal resistance junction to ambient 30 °C/W [3] RθJCTOP Thermal resistance junction to case top 23.8 °C/W [4] RθJCBOTTOM Thermal resistance junction to case bottom 0.9 °C/W [5] Table 4. Maximum ratings ...continued [1] All VSUPS (VSUP1/2/3) must be connected to the same supply (Figure 73). [2] Compared to AGND. [3] Per JEDEC JESD51-6(17) with the board (JESD51-7)(18) horizontal. [4] Thermal resistance between the die and the case top surface as measured by the cold plate method (MIL SPEC - 883 Method 1012.1)(21). [5] Thermal resistance between the die and the solder pad on the bottom of the packaged based on simulation without any interface resistance. 9 Static electrical characteristics TA = –40 °C to 125 °C, unless otherwise specified. VSUP = VSUP_UV_L to 36 V, unless otherwise specified. All voltages referenced to ground. When 28 V < VSUP < 36 V, thermal dissipation must be considered (see Figure 32). Symbol Parameter Min. Typ. Max. Unit Notes Power supply ISUP123 Power supply current in normal mode — — 15.0 mA ISUP3 Power supply current for VSUP3 in normal mode — 3.5 5.0 mA ISUP_LPOFF1 Power supply current in LPOFF (VSUP = 14 V at TA = 25 °C) — 32 — µA ISUP_LPOFF2 Power supply current in LPOFF (VSUP = 18 V at TA = 80 °C) — 42 60 µA [1] VSNS_UV Power supply undervoltage warning 7.0 8.0 9.0 V VSNS_UV_HYST Power supply undervoltage warning hysteresis 0.1 — 0.5 V VSUP_IPFF IPFF input voltage detection 21 — 27 V VSUP_IPFF_HYST IPFF input voltage hysteresis 0.2 — — V VSUP_UV_7 Power supply undervoltage lockout (power up) 7.0 — 8.0 V VSUP_UV_5 Power supply undervoltage lockout (power up) — — 5.6 V VSUP_UV_L Power supply undervoltage lockout (falling — boost configuration) — — 2.7 V VSUP_UV_L_B Power supply undervoltage lockout (falling — buck configuration) — — 4.5 V [2] VSUP_UV_LPOFF Power supply undervoltage lockout in LPOFF — — 4.5 V [3] VSUP_UV_HYST Power supply undervoltage lockout hysteresis — 0.1 — V [4] Table 5. Static electrical characteristics FS6500-FS4500-ASILD All information provided in this document is subject to legal disclaimers. © 2024 NXP B.V. All rights reserved. Product data sheet Rev. 8 — 5 August 2024 Document feedback 13 / 153 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
