Data Sheet

OP27

Rev. H | Page 7 of 21

ABSOLUTE MAXIMUM RATINGS

Table 5.

Parameter

Rating

Supply Voltage

±22 V

Input Voltage1

±22 V

Output Short-Circuit Duration

Indefinite

Differential Input Voltage2

±0.7 V

Differential Input Current2

±25 mA

Storage Temperature Range

−65°C to +150°C

Operating Temperature Range

OP27A (J, Z)

−55°C to +125°C

OP27E (Z)

−25°C to +85°C

OP27E (P)

0°C to 70°C

OP27G (P, S, J, Z)

−40°C to +85°C

Lead Temperature Range (Soldering, 60 sec)

300°C

Junction Temperature

−65°C to +150°C

1 For supply voltages less than ±22 V, the absolute maximum input voltage is

equal to the supply voltage.

2 The inputs of the OP27 are protected by back-to-back diodes. Current

limiting resistors are not used in order to achieve low noise. If differential

input voltage exceeds ±0.7 V, the input current should be limited to 25 mA.

Stresses at or above those listed under Absolute Maximum

Ratings may cause permanent damage to the product. This is a

stress rating only; functional operation of the product at these

or any other conditions above those indicated in the operational

section of this specification is not implied. Operation beyond

the maximum operating conditions for extended periods may

affect product reliability.

THERMAL RESISTANCE

θJA is specified for the worst-case conditions, that is, θJA is

specified for device in socket for TO-99, CERDIP, and PDIP

packages; θJA is specified for device soldered to printed circuit

board for SOIC package.

Absolute maximum ratings apply to both dice and packaged

parts, unless otherwise noted.

Table 6.

Package Type

θJA

θJC

Unit

8-Lead Metal Can (TO-99) (J)

150

18

°C/W

8-Lead CERDIP (Z)

148

16

°C/W

8-Lead PDIP (P)

103

43

°C/W

8-Lead SOIC_N (S)

158

43

°C/W

ESD CAUTION