38 / 46 page

Rev: 13 September 2005
Class 2 Bluetooth module - F2M03C2
Datasheet
6.6
Power Supplies
VDD
Power for the F2M03
GND
Ground for F2M03
NC
To guarantee correct operation, NC must not be connected externally. Free2move recommends that
unconnected terminals be placed on unconnected pads to ensure mechanical robustness.
RESET
Free2move recommend the RESET to be connected to an external micro controller or reset circuit. It is
recommended that RESET is applied for a period greater than 5ms.
At reset the digital I/O pins are set to inputs for bi-directional pins and outputs are tristated. The PIOs have
weak pull-downs.
© 2003 Free2move AB
Page 38(46)