ESD701 Low Capacitance ESD Diode for RF and ADAS Signal Protection

1 Features

• IEC 61000-4-2 ESD Protection:

– ±15kV contact discharge

– ±15kV air gap discharge

• IEC 61000-4-5 surge protection:

– 3A (8/20µs)

• I/O capacitance: 0.3pF (typical)

• Ultra low leakage current: 2nA (typical)

• Low dynamic resistance 0.84Ω (typical)

• Industry standard 0402 package

2 Applications

• Automotive Antenna ESD Protection

• RF Signal ESD Protection

• Near Field Communications (NFC)

• Automotive SerDes w/Power over Coax

• USB Type-C (short-to-Vbus tolerant)

3 Description

The ESD701 is a bidirectional ESD protection diode.

The ESD701 is offered in the industry standard

0402 (DPY) package, and offers an IEC 61000-4-2

protection level of 15kV. The device can clamp

8/20μs surges with peak pulse currents up to 3A in

accordance with the IEC 61000-4-5 standard.

The low capacitance and low leakage current help to

ensure protection against transient events in a variety

of systems and applications. This protection is key for

many applications, such as smaller form factors and

faster data speeds, which are becoming more popular

over time.

Device Information

PART NUMBER

PACKAGE(1)

PACKAGE SIZE(2)

ESD701

DPY (X1SON, 2)

1mm × 0.6mm

(1)

For more information, see Section 14.

(2)

The package size (length × width) is a nominal value and

includes pins, where applicable.

IO

GND

Figure 3-1. Functional Block Diagram

ESD701

SLVSI66 – OCTOBER 2024

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.