L6731BTR datasheet(10/24 Pages) STMICROELECTRONICS

Part #	L6731BTR

Description	Adjustable step-down controller with synchronous rectification Dedicated to DDR Memory

PDF	24 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

10 / 24 page

Device description

L6731B

10/24

Device description

5.1

Oscillator

The switching frequency can be fixed to two values: 250KHz or 500KHz by setting the proper

voltage at the EAREF pin (see Table 3. Pins function and section 4.3 Internal and external

reference).

5.2

Internal LDO

An internal LDO supplies the internal circuitry of the device. The input of this stage is the VCC

pin and the output (5V) is the VCCDR pin (Figure 3.).

The LDO can be by-passed, providing directly a 5V voltage to VCCDR. In this case VCC and

VCCDR pins must be shorted together as shown in Figure 4. VCCDR pin must be filtered with at

least 1µF capacitor to sustain the internal LDO during the recharge of the bootstrap capacitor.

VCCDR also represents a voltage reference for PGOOD pin (see Table 3. Pins Function).

Figure 3.

LDO block diagram.

LDO

4.5V

÷14V

L6731BTR Datasheet(PDF) 10 Page - STMicroelectronics