| Electronic Components Datasheet Search |
|
STM32F205RFT6 Datasheet(PDF) 131 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F205RFT6 Datasheet(HTML) 131 Page - STMicroelectronics |
|
131 / 184 page ![]() DocID15818 Rev 15 131/184 STM32F20xxx Electrical characteristics 183 Figure 56. 12-bit buffered/non-buffered DAC 1. The DAC integrates an output buffer that can be used to reduce the output impedance and to drive external loads directly, without the use of an external operational amplifier. The buffer can be bypassed by configuring the BOFFx bit in the DAC_CR register. 6.3.22 Temperature sensor characteristics Update rate(2) Max frequency for a correct DAC_OUT change when small variation in the input code (from code i to i+1LSB) -- 1 MS/s CLOAD ≤ 50 pF, RLOAD ≥ 5 kΩ tWAKEUP(4) Wakeup time from off state (Setting the ENx bit in the DAC Control register) - 6.5 10 µs CLOAD ≤ 50 pF, RLOAD ≥ 5 kΩ input code between lowest and highest possible ones. PSRR+ (2) Power supply rejection ratio (to VDDA) (static DC measurement) - –67 –40 dB No RLOAD, CLOAD = 50 pF 1. On devices in WLCSP64+2 package, if IRROFF is set to VDD, the supply voltage can drop to 1.7 V when the device operates in the 0 to 70 °C temperature range using an external power supply supervisor (see Section 3.16). 2. Guaranteed by design, not tested in production. 3. The quiescent mode corresponds to a state where the DAC maintains a stable output level to ensure that no dynamic consumption occurs. 4. Guaranteed by characterization results, not tested in production. Table 68. DAC characteristics (continued) Symbol Parameter Min Typ Max Unit Comments R L C L Buffered/Non-buffered DAC DAC_OUTx Buffer(1) 12-bit digital to analog converter ai17157V2 Table 69. Temperature sensor characteristics Symbol Parameter Min Typ Max Unit TL(1) 1. Guaranteed by characterization results, not tested in production. VSENSE linearity with temperature - ±1 ±2°C Avg_Slope(1) Average slope - 2.5 - mV/°C V25(1) Voltage at 25 °C - 0.76 - V tSTART(2) 2. Guaranteed by design, not tested in production. Startup time - 6 10 µs TS_temp(2) ADC sampling time when reading the temperature (1 °C accuracy) 10 - - µs |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |